Specifications - SMC Networks ex250-sen1 Operation Manual

Specifications

■Specifications
General specification
Item
Operating ambient temp.
Operating ambient humidity
Storage ambient temp.
Withstand voltage
Insulation resistance
Operating environment
Pollution degree
Enclosure
Weight
Applicable standard
Electrical specifications
Item
Rated voltage
Range of power supply voltage
Rated current
Number of input/output points
Output type
∗: The maximum output point is 24 when the Power block is connected.
Communication specification
Item
Protocol
Media
Communication speed
Max. segment length
Max. transceiver number
Communication method
Fieldbus protocol
I/O message
IP address setting range
Device information
o
5 to 45 C
35 to 85%RH (No dew condensation)
o
-20 to +60 C
500 VAC for 1 min.
500 VDC 10 MΩ or more
No corrosive gas
Pollution degree 3
IP67
Approx. 250 g
UL/CSA, CE
24 VDC
Power supply for input and control: 24 VDC±10%
Power supply for output: 24 VDC+10%/-5%
Power supply for input and control: Max. 1.1 A
Inside SI Unit: 0.1 A
Input device: 1 A
Power supply for output: Max. 2 A
Input point: Max. 32 / Output point: Max. 32
PNP (negative common) / source
Ethernet (IEEE802.3)
100BASE-TX
10 M/100 Mbps (Automatic selection or manual setting)
100 m (328 ft)
2 (per segment)
Full duplex/Half duplex (Automatic selection or manual setting)
TM
EtherNet/IP
Input : Data length 6 byte, Instance 100.
Output : Data length 4 byte, Instance 150.
192.168.0.1 to 192.168.0.14 (Setting by an internal switch)
Or optional setting by the DHCP server
Vender ID : 7 (SMC Corp.)
Product type : 12 (communication adapter)
Product code : 107
-26-
Specification
Specification
∗
Specification
No.EX##-OMK0004-A