Supervision; Supervision Delay - Siemens Synco living Operating Instructions Manual

The settings Release and Function become effective as soon as the central
apartment unit is set to "Absent" via Absence / Supervision button":
On
A
Off
3..30 Min
On
B
Off
On
C
Off
Simulation release (On, Off)
A
Light (On, Off) with function "Random"
B
Light (On, Off) with Function "Continuously on"
C
t Time
The presence simulation is ended as soon as the central apartment unit is set
to "Present".

Supervision

Supervision delay

You can set a supervision delay to avoid generating a message upon supervi-
sion activation and simultaneously open window / door.
If supervised windows are open when supervision is activated, a constant
beep is sounded. The Info page Windows / Doors provides information on
which rooms contain open windows or doors.
Any open windows and doors can now be closed.
After you close the supervised window, the constant signal becomes a beep
that doubles in the last 15 seconds of supervision delay. The remaining su-
pervision delay time is also displayed on the central apartment unit.
You can set the desired delay time (00.00..59.55 ms) via the following com-
mand sequence:
Main menu > Supervision > Supervision delay:
The set delay time applies to all windows and doors.
Factory setting
Your setting
You can set the volume of the signal / beep as desired (0..100%). While you
adjust the volume, a constant beep is sounded at the selected volume.
Siemens
Building Technologies
3..30 Min
05.00 ms
Synco™ living Operating instructions
Central apartment unit QAX910
B2707Z04a
t
65 / 100
CE1B2707en
23.08.2008