Maintenance - Electrolux EKE56403X Operating And Installation Instructions

5. CLEANING AND MAINTENANCE
Hob Surface
Stainless Steel:
Stainless steel parts must be cleaned frequently with mildly warm soapy water and a soft sponge
and then dry with a soft cloth. Do not use abrasive powders or abrasive cleaning metarials. Do not
leave vinegar, coffee, milk, salt, water, lemon or tomato juice to remain in contact with stainless
steel parts long periods of time.
Cleaning the hotplate hob
Hobs should be cleaned wiping with a dampened cloth. Cleaning of the stainless steel parts should be done only with
water and such parts should be wiped dry with a soft cloth.

5.2 Maintenance

Change of Oven Lamp
At first plug the product off from electric supply and make sure that the product is cool. Remove the
bulb after removing the glass lens. Assemble the new bulb resistant to 300°C to the place of the
bulb that you removed (230 V, 25 Watt, Type E14). Place the glass lens. Your product will be ready
for use after this process.
The lamp design is specific for the use in household cooking appliances and it is not suitable for
household room illumination.
Other Controls
Periodically check the gas connection pipe. Even if any simple abnormality is felt, inform the
technical service to have it changed. We recommend the gas connection parts to be changed once a
year. If any abnormality is felt while operating the control knobs of cooker, contact to the authorized
service.
19