About The Liquid Crystal Display; Error Messages; Cleaning The Touch Display; List Of Icons Displayed On The Main Unit Display Section - Pioneer XDJ-1000MK2 Operating Instructions Manual

Problem
The scale is not displayed.
PRO DJ LINK does not work well.
There is no response when you touch
the screen, or the response is bad. A
position different from the actually
touched location responds.
The enlarged waveform is not
displayed.

About the liquid crystal display

! Small black or shining points may appear on the liquid crystal display. This is a phenomenon inherent to liquid crystal displays; this is not a
malfunction.
! When using in cold places, the liquid crystal display may be dark for a while after this unit's power is turned on. It will reach the normal brightness
after a while.
! When the liquid crystal display is exposed to direct sunlight, the light will reflect off it, making it difficult to see. Block the direct sunlight.

Error messages

When this unit cannot operate normally, an error code appears on the display. Check the table below and take the measures indicated. If an error code
not shown on the table below is displayed, or if the same error code is displayed again after taking the indicated action, contact your store of purchase.
Error code Error type
E-8302
CANNOT PLAY TRACK(****)
E-8304
UNSUPPORTED FILE FORMAT
E-8305

Cleaning the touch display

Do not use organic solvents, acids or alkalis for cleaning the surface of the touch display. Wipe with a dry soft cloth or a cloth immersed in neutral
detergent and squeezed properly.

List of icons displayed on the main unit display section

Genre
Artist
Album
Track/file name
Playlist
HISTORY
Hot Cue Bank List
Rating
Time
40
En
Check
Is the track over 15 minutes long?
Are the player numbers properly set?
Is the LAN cable properly connected?
Is the switching hub's power turned on?
Is an unnecessary device connected to the switch-
ing hub?
Is it connected by USB cable?
Calibration adjustment of touch display is
deviating.
Is the track over 60 minutes long?
Description of error
Track data (files) in the USB cannot be read
correctly.
Music files that cannot be played normally
are loaded.
Player number (1 – 4)
Edit the rating
Registered in tag list
Tempo (BPM)
Color
USB
SD
Remedy
The scale is not displayed for tracks whose playing time is over 15 minutes.
(p. 16 )
Set [PLAYER No.] to [AUTO] or to a number different from the number currently
set. (p. 35 )
Connect the LAN cable properly to the [LINK] terminal.
Turn the switching hub's power on.
Disconnect the unnecessary device from the switching hub.
For a USB connection, install the USB (LINK Export) connections driver
software.
Adjust the touch display by using the [TOUCH DISPLAY CALIBRATION] settings
in the [UTILITY] screen.
When the power is OFF, users can view the [TOUCH DISPLAY CALIBRATION]
settings screen by switching the power ON while keeping the
[OUT(OUT ADJUST)] button pressed.
The enlarged waveform is not displayed for tracks whose playing time is over 60
minutes.
Cause and action
The track data (file) may be corrupt. dCheck whether the track (file)
can be played on another player, etc., capable of playing the same
formats as this unit.
Format is wrong.dReplace with music files in the proper format.
Computer Close folder
Year Remixer
Label Original artist
Key Search
Bit rate DJ play count
Playing Date library added
Open folder Comment
WAIT
rekordbox
Mixer
Hot cue