General Parameters; Setting The Date And Time - Honeywell Domonial cmi Quick Install Manual

English
VIEW DEVICE
-----------------
LBL "XDevice Lbl"
TYPE "XX" "CH" "YY"
RF "x"/10..............
FAULTS B T O S .....
EDIT (OK)
MODIFY DEVICE
--------------------
1. LABEL
2. EDIT
3. DELETE
4. CHANNEL
EDIT (OK)

4.2 General Parameters

SELECT ADDRESS
------------------------
TYPE ...G...................
ADDRESS..................
NO ( ) YES (OK)
Select 3-PARAMETERS to change the general system parameter (e.g. entry and exit delays).
Use the Code Reference document to find the addresses and possible values for the parameters.

4.3 Setting the Date and Time

1-REGISTER
2-DEVICES
3-PARAMETERS
4-DATE & TIME
5-SYSTEM DIAG.
6-TRANSM.STATUS
7-RADIO SCAN
8-ABORT
9-SAVE+QUIT
12
Trigger a registration message by pressing the tamper or the relevant
buttons on the device.
The serial number, type and radio level appear on the TCU screen.
Press OK to display the Modify Device screen.
Select from the list and press OK or press
Use the Code Reference document to find the address and possible value of
the parameters.
SELECT ADDRESS
------------------------
LABEL "XDevice Lbl"
TYPE "YY"
ADDRESS
CANCEL ( )
SET PARAMETER
--------------------
TYPE ...G...................
VALUE .......................
CANCEL ( )
From the main menu, select 4-DATE & TIME.
to return to the main menu
LBL X Device Lbl.....
TYPE "YY"................
ADDRESS ................
VAL (OK)
CANCEL ( )
VAL (OK)
Programming
SET PARAMETER
--------------------
VAL (OK)