Installing The Mobile Device - Samsung SM-R323 Gear VR User Manual

Installing the Mobile Device

This section outlines the process for removing the cover, replacing
the device holder, and then installing the desired device type.
Removing the Cover
► Gently pull the
right device holder
outwards, then
gently remove the
protective front
cover.
Note: Keep the enses clean and protect them from getting scratched.
If the lenses get dirty or steam up, clean them with the lens cleaning
cloth. When you are not wearing the Gear VR, do not place objects
on the proximity sensor inside the Gear VR. Doing so may cause the
proximity sensor to remain on and drain the mobile device's battery.
38