Configuration Edit/Display - Paradyne M/HDSL Standalone Termination Unit Hotwiret 7986 Installation Instructions Manual

Configuration Edit/Display

Î
6
The Configuration Edit/Display screen is displayed when the current, customer,
or default configuration is loaded. To access the Configuration Edit/Display
screen, follow this menu selection sequence:
Main Menu Configuration
– or –
Main Menu Configuration
main/config/edit
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Save
Select . . . To Access the . . .
Network Network Interface Options, Table 1
G.703 G.703 Interface Options, Table 2
System Options System Options, Table 3
Communication Communication Port Options, Table 4
Port
H
Management Telnet Session Options, Table 5
and
H
Communication Protocol Options,
Communication
Table 6
H
General SNMP Management
Options, Table 7
H
SNMP NMS Security Options,
Table 8
H
SNMP Traps Options, Table 9
March 1999
Current Configuration
Default Factory Configuration
CONFIGURATION EDIT/DISPLAY
Network
G.703
System Options
Communication Port
Management and Communication
Hotwire
Model: 7986
Î Î
MainMenu Exit
To Configure the . . .
DSL network interfaces on
the unit.
G.703 interface.
General system options of
the unit.
Unit's COM port options.
Management support of the
unit through SNMP and
Telnet.
7986-A2-GZ40-00