Attaching The Flash - Sony NEX-3 Instruction Manual

NEX-3/3C
-
• When the access lamp is lit, do not remove the memory card or the battery pack, or
tum off the power. The data may be corrupted.
Attaching the flash
When you want to use a flash during shooting, attach the flash device
(supplied).
The flash is enabled when it is raised, and disabled when lowered.
1
Attach the flash to the Smart
Accessory Terminal of the
camera.
• When using the E18 - 200 mm lens,
you must attach the extender
(page 24).
2
Fasten the screw to secure the flash.
3
To fire the flash, raise the
fl ash fi rst.
• Lower the flash when you do not
intend to use it.
GB
23