Radio - JVC KD-R681 Instruction Manual

GETTING STARTED
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx YES: Starts upgrading the firmware. ;
NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see:
<http://www.jvc.net/cs/car/>.
CLOCK
TIME SYNC ON: The clock time is automatically set using the Clock Time
(CT) data in FM Radio Data System signal. ; OFF: Cancels.
CLOCK DISPLAY ON: The clock time is shown on the display even when the
unit is turned off. ; OFF: Cancels.
ENGLISH Select the display language for menu and music
information if applicable.
ESPANOL
By default, ENGLISH is selected.

RADIO

"ST" lights up when receiving an FM stereo broadcast with sufficient signal strength.
Search for a station
1 Press repeatedly to select FM, AM, SW1 or SW2.
2 Press (or press
automatically.
(or)
Press and hold (or press and hold
"M" flashes, then press repeatedly to search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM/SW1/SW2.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1
Press and hold
2
Press to select a preset number, then press
The preset number flashes and "MEMORY" appears.
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1
Press .
2
Press to select a preset number, then press
on the remote control) to search for a station
on the remote control) until
until "PRESET MODE" flashes.
.
.
5
ENGLISH