Heart Beat Signal - Linksys BEFSR41 Quick Installation Manual

3.
Keep Alive if you always want to be connected to your ISP, or
Select
select Connect on Demand if you are charged for the time that you
are connected to your ISP.
4.
Save Settings.
Click
5.
Status tab, and then click Connect to start the connection.
Click the
6.
Go to Step E.
RAS (for SingTel)
RAS is a service used in Singapore
only. If you are using a RAS
connection, check with your ISP for
the necessary setup information.
When you are finished, go to Step E.
PPTP
1.
PPTP is a service used in Europe
and Israel only. If you are
using a PPTP connection, then
select PPTP as the Internet
Connection Type.
2.
Enter the IP Address, Subnet
Mask, and Default Gateway
address provided by your ISP.
3.
Then enter the User Name and Password provided by your ISP.
4.
Keep Alive if you always want to be connected to your ISP, or
Select
select Connect on Demand if you are charged for the time that you
are connected to your ISP.
5.
Save Settings.
Click
6.
Status tab, and then click Connect to start the connection.
Click the
7.
Go to Step E.

Heart Beat Signal

Heart Beat Signal is a service used
in Australia only. If you are using a
Heart Beat Signal connection, check
with your ISP for the necessary setup
information. When you are finished,
go to Step E.