Table of Contents
Advertisement
Before You Start
01
Maintenance
Replacing the Fuse
Make sure the amperage matches the
specified value when replacing the fu-
ses. If the fuse is blown, check the po-
wer connection and replace with a n-
ew one. If the same problem occurs,
it may be a malfunction. In such cases,
please consult the nearest service dealer.
Warning
!
Never use a fuse with a rated
amperage more than that supplied to
you r unit , otherwise i t wil l damage the
unit.
Replacing the Battery
When the range of the card remote
control becomes short or no longer
functions, replace the lithium battery
with a new button cell (CR2025).
Check the battery polarity is correct
before replacing.
Gently pull out the Battery Holder while
pressing the Stopper.
Put the button-type battery with mark(+)
upward into the Battery Holder.
6
Insert the Battery Holder into the Remote
Control.
Precautions on Using Lithium
Battery
Always keep the lithium battery beyond
the reach of children. If swallowed, see a
doctor immediately.
Clean the battery with a dry cloth to ensure
it is perfectly connected.
Make sure the polarity is correct when
loading the battery.
To prevent short circuit, do not use
metal tweezers to clip the battery.
Warning!
!
Improper handling of the battery may
lead to explosion.
It cannot be charged , disassembled or
thrown int o a fire.
Bluetooth
Cellphone Pairing Mode
1. Browse your cellphone menu and find
the connectivity or Bluetooth connection
section.
2. Select search for a new hands free device
function and allow the phone to find the
mobile.
(Different cellphones have different blue-
tooth menus, please refer to your phone
manul.)
3. When CAR A/V DEVICE appears, select
this item.
( if it can not be connected, please refer
to mobile manual, and connect it again.)
4. Input the password, the password is:
1234.
5. Press the connect with the Handsfree
option on your cellphone, and CON-
NECTED appears.
Bluetooth Connection and
Disconnection
When the Bluetooth connection is established
between this unit and the cellphone, the Bluetooth
icon
on the display appears in red.
Press
29
PAIR to turn off the Bluetooth con-
nection, and
appears in blue.
Press
POWER to turn off the power,
7
and the icon
disappears.
Press
to cancel the pair, when it connected,
29
the display shows CONNECTED.
Note:
* Please keep the phone battery is fully charged,
or else the bluetooth connection will be disturbed.
* To ensure connection succeed
----Please delete menu of cellphone with blue-
tooth.
----Please reset the unit and cellphone.
----Please reset every step of pairing.
* Disconnect after paring
----Please pair the phone in manual.
For example: pairing fixture
cellphone
connect.
* Pressing PAIR on the main unit or
in the
5
monitor also performs the same function.
Using the Unit as a Handsfree
Device
When the unit is ringing, then it appears
call from and the phone number ID******
*****on the dialing,
To accept call: Press
to answer a call,
30
it appears PICK UP on the display.
To reject call: Press
31
to reject a call,
it appears REJECT on the display.
To end call: Press
to end call, and
HANG UP appears on the display.
Note:
* Some of cellphones do not support rejecting
calls during Bluetooth mode.
* Pressing
and
on the unit or
and
performs the same function.
Last Number Dialing
Press
to redial and dial the last number
DIALING displays on the screen.
Note:
14
* Pressing
or
on the main unit
performs the same function.
* To dial the number from the unit in the car
only.
To Dial by Cellphone
The unit is activated automatically when Bluetooth
is connected, and DIALING appears.
09
43
Advertisement
Table of Contents
