Table of Contents
Advertisement
DVD/VCD/MP4
05
Changing the viewing angle
(Multi-angle)
With DVDs featuring multi-angle (scenes
shot from multiple angles) recordings, you
can press
7
ANGLE to switch among vie-
wing angles during playback.
Selection options switch as follows:
ANGLE 1
ANGLE 2
ANGLE 3......
Notes:
* This function is operated by using
the
remote
control.
* This function only operates with DVDs featu-
ring multi-angle recordings.
* The
mark on a DVD's package indic-
3
ates it features multi-angle scenes.
The number in the
mark indicates the
3
number of angles from which scenes were shot.
* It is invalid to press ANGLE during fast
forward/fast reverse or pause.
Selecting Channel
During VCD status, repeatedly press
AUDIO button to select the following
channel:
Stereo
Mono Left
Mono Right
Selecting the corresponding channel to set
the different sound characters.
Note:
This function is operated by using the remote
*
control only.
28
Program Playing
During VCD mode, press
13
PROG, the
TFT displays the program menu. Press
NUMBER BUTTONS to select the track
Number and then press
to move the cursor
27
to START, press ENTER to start program
playing; move the cursor to EXIT and press
ENTER to exit the program playing. Move
the cursor to
and press ENTER to the
previous page; move the cursor to
press ENTER to the next page.
During this process, press
18
the program playing.
Note:
The function is only valid on remote control.
*
* Press
22
CLEAR to clear the mistake input.
Playing PBC (Menu)
During VCD status, first press
PBC playback starts and the menu of entire
disc appears on the monitor, and then you
can select your favorite track by using
6
. When a track is playing,
Number Buttons
you can
press
4
to return to
MENU
menu
if you would like to end the track and
select others. To cancel PBC playing, press
3
button again.
TITLE
Note:
This function is operated by using the remote
*
control.
PBC playing confirms to version 2.0 of SVCD/
*
DVD disc only.
Main Menu
2.Audio Adjust
After selecting AUDIO, the sub menu will
appear as follows:
VOLUME
BALANCE
BASS
and
to cancel
You can adjust VOLUME, SUBWOOFER,
BALANCE, FAD, BASS, TREBLE, for
example, press FAD, the setting menu will
appear as follow:
,
3
TITLE
VOLUME
23
the
Press
and
level, press EXIT to exit this menu.
Note:
* Adjusting the other options performs the same
operation.
3.Source Adjust
In the main menu, press SOURCE in the
monitor, the sub menu will appear as follows:
SUBWOOFE
FAD
RADIO
TREBLE
USB
EXIT
You can adjust the above items to ON or
OFF,
press the corresponding button to set.
If an input is off it will display red. For
example, pressing source will not allow
you to use the SD input if the SD icon
is red.
4.System Adjust
After selecting SYSTEM, the sub menu will
appear as follows:
FAD
F4
to adjust the desired FAD
CLOCK SYS
KEY BEEP
MONI FLEX
In this menu you can adjust CLOCK
SYSTEM, KEY BEEP, MONITOR FLEX
and so on.
04
DVD
SD
AUXF
AUXR
EXIT
EXIT
21
Advertisement
Table of Contents
