Table of Contents
Advertisement
NOTES:
In this document:
— A telephone is used to represent any equipment that plugs into a phone jack
and uses the POTS line, such as a phone, modem, or fax machine.
— End-user system is used to represent any PC with an Ethernet connection and
MVL-based service.
— Service provider is used to represent any Internet Service Provider (ISP) or
remote LAN access provider.
Before You Begin
Verify that your package contains the following:
-
Hotwire 6310 MVL Modem
-
MVL interface cable with RJ11 connectors
-
Power cord with power transformer
-
One ferrite choke
Be sure to register your warranty at www.paradyne.com/warranty.
Wiring and Cables You Need
The following wiring and standard connectors are used with this product:
-
Standard RJ11 wall jack for the MVL cabling.
-
Standard Ethernet 8-pin, non-keyed modular plug for a PC or workstation.
An Ethernet straight-through or crossover cable is used. Refer to Installing the
Hotwire 6310 MVL Modem on page 4 for Ethernet cable details.
MVL Phone Filter
Depending on the type of telephone handset and the quality of the home or business
wiring, a phone filter is recommended to improve data transmission throughput and
minimize background noise during a telephone conversation.
There are two Hotwire MVL Phone Filters:
H
Hotwire 6035 MVL Phone Filter designed for use with a tabletop phone.
H
Hotwire 6040 MVL Wall Jack Phone Filter designed for use with a wall phone.
3
Advertisement
Table of Contents
