Hoover BH52210 User Manual page 24

Maintenance:
Removing blockages from the Powered Head.
WARNING
!
Risk of personal injury – the brush
roll may suddenly restart. Turn power
switch off and remove the battery before
cleaning of servicing the brush roll.
21
The brushbar should be
removed from the Powered
Head before attempting to
remove any blockages. Using
scissors remove any threads
or hair from around the
brushbar and clear any dirt or
debris from Powered Head.
!
Removing blockages from the reach wand.
LUBRICATION The motor and brushroll are equipped with bearings
which contain sufficient lubrication for their lifetime. The addition
of lubricant could cause damage. Do not add lubricant to motor or
brushroll.
Any other servicing should be done by an authorized service
representative. If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped into water, take it
to a service center prior to continuing use.
To test for a blockage in the
reach wand, drop a small ball of
paper into the wand. The paper
will drop through if the wand is
clear. Use a broom handle or
similar blunt object to remove
any blockage.