Stopping And Resuming Route Guidance; Tions - Volkswagen RNS 310 User Manual

Navigationssystem_111.5U6.N31_23.book Seite 52 Donnerstag, 22. April 2010 5:16 17
•
Press the function button in the
Map overview
pop-up window to display the current position
and the destination on an overview map.
The scale of the overview map cannot be changed.
•
Press the function button in the overview
Back
map to change back to the previous map view.
Displaying the speed limit
If the speed limit for the road currently being
driven is saved in the navigation data, the speed
limit can be displayed on the left of the map. The
display of the turning arrow has priority over the
speed limit display during route guidance.
Take note of how up-to-date the navigation data is
and pay attention to any restrictions ⇒ page 37!

Stopping and resuming route guidance

Fig. 65 Stopping route guidance.
Please first read and observe the safety in-
structions on page 3 and the introduc-
tory information and safety instructions
page 49.
Active route guidance can be stopped at any time
and resumed later, based on the current vehicle lo-
cation.
Stopping route guidance
•
In the Map view, briefly press to the left or right
on the bottom row of the screen in order to display
the function buttons.
RNS 310, RNS 315
The display of the speed limit must be enabled in
the navigation settings ⇒ page 56.
Points of interest on the map
Depending on the settings, points of interest (gas
stations, parking, Volkswagen dealers) are shown
as symbols on the map ⇒ page 56.
If a turn was missed during route guidance
and there is no possibility to turn, continue
driving until the navigation system offers an alter-
native route.
The quality of the device's announcements
depends on the navigation data being
used.
Fig. 66 Interrupted route guidance.
•
function button ⇒
Press the
Stop
•
OR: Switch to the Navigation main menu and
on
press the function button.
Stop
Resuming route guidance to the last destination
•
In Map view, route guidance to the last destina-
tion is automatically resumed by pressing the
function button ⇒
fig. 65.
Start
fig. 66.