Accessories; Installation Instructions - Rheem rgph-10eamer Instruction Manual

ACCESSORIES—UPFLOW
OPTION CODE FOR HIGH ALTITUDE:
US—277
Canada—For high altitude derate procedure, refer to the furnace

installation instructions.

(U.S. Models—Kit packaged with furnace.
Requires field installation.)
EXTERNAL BOTTOM FILTER RACK: RXGF-CB
FILTER RACK FILTER SIZES† INCHES [mm]
MODEL
RGPH-
05, 07, 10*A
10*BRJ
12, 15
† Filter racks are shipped without filters.
Filters shipped with furnace may be used or a suitable 1" [25.4 mm] filter.
*Designates "E" or "N".
RXPF-F01 and F02
FOSSIL FUEL KITS are for use with Rheem Heat Pumps
and Criterion II warm air furnaces. The RXPF-F02 meets TVA
requirements.
6 Rheem Manufacturing Company
RXGF-CA
(SIDE)
15 3 / x 25
4
[400 x 635]
15 3 / x 25
4
[400 x 635]
15 3 / x 25
4
[400 x 635]
THE RXGR-C24B MUST ONLY BE INSTALLED ON THE SIDE
OPPOSITE THE GAS AND ELECTRICAL CONNECTIONS.
[ ] Designates Metric Conversions
ACCESSORY RETURN
AIR CABINETS
Return Air Cabinets may
be installed on either side
application except RXGR-C24B
(side application must be
on side opposite gas and
electrical connections).
RETURN AIR CABINETS
IN. [mm]
RXGR-C14B 14
RXGR-C17B 17 1
RXGR-C21B 21
RXGR-C24B 24 1
WARNING: IMPORTANT NOTICE
A SOLID METAL BASE PLATE (SEE TABLE) MUST BE IN PLACE WHEN THE FURNACE
IS INSTALLED WITH SIDE AIR RETURN DUCTS. FAILURE TO INSTALL A BASE PLATE
COULD CAUSE PRODUCTS OF COMBUSTION TO BE CIRCULATED INTO THE LIVING
SPACE AND CREATE POTENTIALLY HAZARDOUS CONDITIONS.
FURNACE
SOLID BOTTOM
WIDTH
KIT NO.
IN. [mm]
14 [356] RXGB-D14 AE-61874-01
17 1 / [445] RXGB-D17 AE-61874-02
2
21 [533] RXGB-D21 AE-61874-03
24 1 / [622] RXGB-D24 AE-61874-04
2
A FILTER SIZE
IN. [mm]
[356] (2) 12 x 16 [305 x 406]
/ [445] (2) 12 x 16 [305 x 406]
2
[533] (2) 20 x 16 [508 x 406]
/ [622] (2) 24 x 16 [610 x 406]
2
BASE
BASE
PLATE SIZE
PLATE NO.
IN. [mm]
11 5 / x 23 9 / [295 x 598]
8 16
15 1 / x 23 9 / [384 x 598]
8 16
18 5 / x 23 9 / [473 x 598]
8 16
25 5 / x 23 9 / [651 x 598]
8 16