CITROEN C3 Desire User Manual page 141

PRACTICAL INFORMATION
CHANGING A FUSE
Procedure for replacing a faulty fuse
with a new fuse to rectify a failure of the
corresponding function.
Access to the tools
The extraction pliers and the spare fuse
storage locations are fi tted to the back
of the dashboard fusebox cover.
For access to them:
 open the glove box lid,
 unclip the fusebox cover by pulling
on the side,
 remove the cover completely,
11 11
 remove the pliers.
130
Changing a fuse
Before changing a fuse, the cause of the
failure must be identifi ed and rectifi ed.
 Identify the faulty fuse by checking
the condition of its fi lament.
Correct Incorrect
 Use the special pliers to extract the
fuse from its housing.
 Always replace the faulty fuse with a
fuse of the same rating.
 Check the correspondence between
the number etched on the box, the
rating etched on the fuse and the ta-
bles below.
Installing electrical
accessories
Your vehicle's electrical
tem is designed to operate with
standard or optional equipment.
Before installing other electrical
equipment or accessories on
your vehicle, contact a CITROËN
dealer.
CITROËN will not accept re-
sponsibility for the cost incurred
in repairing your vehicle or for
rectifying malfunctions resulting
from the installation of accesso-
ries not supplied and not recom-
mended by CITROËN and not
installed in accordance with its
instructions, in particular when
the combined consumption of all
of the additional equipment con-
nected exceeds 10 milliamperes.
sys-