Pioneer VSX-S520D Instruction Manual page 10

>
Before Start
> Part Names
1
a
1/2˝
(12 mm)
2
a
3
a speaker cable, b subwoofer cable
> Install > Initial Setup
b
Connect the speakers
Refer to the illustration to connect the speaker system.
Twist the wires of the speaker cable tightly before inserting
into the terminals. Make correct connection between the
unit's jacks and speaker's jacks (+ to + and – to –) for each
channel. If connection is wrong, a bass sound may become
poor due to reverse phase.
Either a powered subwoofer or passive subwoofer may be
> Playback
a
FRONT FRONT CENTER
R L
Advanced Setup | Firmware Update | Others
SURROUND SURROUND
R L
Powered
Subwoofer
connected. To connect a powered subwoofer, use a
subwoofer cable and connect to the SUBWOOFER PRE
OUT jack. To connect a passive subwoofer, connect to the
SPEAKERS terminals with speaker cables as shown below.
E
N
b
9