Advertisement
1. When the full bag indicator
turns red, you must replace
your bag.
2. Remove the hose by pressing
the 2 buttons at the end of the
hose and pull upward.
3. Pull up on the front cover
(Diagram 1).
4. Lift out bag chamber with bag
attached, by pulling on the bag
chamber handle (Diagram 2).
5.
Remove full bag from chamber
by pressing the release latch
(hinge) of the bag chamber
(Diagram 3).
1.
Insert a new bag into bag
chamber by inserting the THIS
SIDE
DOWN"
portion of the
bag collar into the bag guides
(Diagram 1). Secure in place
by locking the bag collar under
the release latch (hinge).
2.
Return bag and bag chamber
to the cleaner by sliding the
large tab of the bag chamber
into the chamber guides
(Diagram 2).
3.
Close front cover. NOTE: If bag
is not installed correctly
-
cover
will not close.
4.
Before re-connecting hose,
be
sure the inlet opening of the
dustbag is properly aligned with
the opening of hose connection
(Diagram 3).
5.
Reconnect hose.
Advertisement
