Advertisement
WARN1NG:TO REDUCE I
Problem
Cleaner won't pick-up
or low suction
Cleaner tools won't
pick up
3ISK OF PERSONAL INJURY
-
UNF
Possible Reasons
1. Power cord not firmly plugged into
outlet.
2. Blown fuse or tripped breaker.
3. Needs service.
4.
Thermal protector shut cleaner off
due to high motor temperatures.
1. Dirt bag not installed correctly.
2.
Dirt bag full.
3. Nouleldirt passage hose clogged.
-
1. Dirt bag full.
2. Dirt bag not installed correctly.
3. Hose not installed correctly.
1. Hose clogged.
2. Hose inlet clogged.
3. Dirt bag full.
4.
Filter clogged.
JG
CLEANER BEFORE SERVICING
Possible Solutions
1. Plug cord in firmly.
2. Check fuse or breaker in home.
Replace fuselreset breaker.
3. Take to service center or call
1-800-321-1 134.
4.
Review bottom of safety instruct-
ions-Pg. 3 OR call 1-800-321
-1
134.
1. Review dirt bag removal and
replacement-Pg. 8.
2. Replace dirt bag-Pg. 8.
3. Remove base no& cover;
remove obstruction OR Remove
hose; remove obstruction.
1. Review dirt bag removal and
replacement-Pg. 8.
2.
Review dirt bag removal and
replacement-Pg. 8.
3. Review hose installation-Pg. 6.
1. Remove hose and tools;
remove obstruction-Pg. 6.
2. Remove hose and clean inlet.
3. Replace dirt bag-Pg.
8.
4. Clean filter-Pg. 9.
ANY OTHER SERVICING SHOULD BE DONE BY AN
AUTHORIZED SERVICE REPRESENTATIVE
TO LOCATE A DEALER NEAR YOU, VISIT OUR WEBSITE
AT www.royalvacuums.com OR CALL CUSTOMER SERVICE
AT (1 -800-321 -1 1 34)
In the event that further assistance is required, see yourYellow Pages for an authorized RoyaP Dealer.
Costs of any transportation to and from any place of repair are to
be
paid by the owner. The service
parts used
in
this unit are easily replaced and readily available from an authorized RoyalB Dealer or
retailer. Always Identify your cleaner by the model number and manufacturing code when requesting
information or ordering replacement parts. (The model number appears on the bottom of the cleaner.)
Advertisement
