Bfd Mad-Enabled Irf Configuration Example - HP 5130 EI series Configuration Manual

[Sysname-Bridge-Aggregation2] quit
# Assign GigabitEthernet 1/0/2, GigabitEthernet 2/0/1, GigabitEthernet 3/0/2, and
GigabitEthernet 4/0/1 to the aggregate interface.
[Sysname] interface gigabitethernet 1/0/2
[Sysname-GigabitEthernet1/0/2] port link-aggregation group 2
[Sysname-GigabitEthernet1/0/2] quit
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] port link-aggregation group 2
[Sysname-GigabitEthernet2/0/1] quit
[Sysname] interface gigabitethernet 3/0/2
[Sysname-GigabitEthernet3/0/2] port link-aggregation group 2
[Sysname-GigabitEthernet3/0/2] quit
[Sysname] interface gigabitethernet 4/0/1
[Sysname-GigabitEthernet4/0/1] port link-aggregation group 2
[Sysname-GigabitEthernet4/0/1] quit
6. Configure Device E as the intermediate device:
CAUTION:
If the intermediate device is also an IRF fabric, assign the two IRF fabrics different domain IDs for
correct split detection. False detection causes IRF split.
# Create a dynamic aggregate interface.
<Sysname> system-view
[Sysname] interface bridge-aggregation 2
[Sysname-Bridge-Aggregation2] link-aggregation mode dynamic
[Sysname-Bridge-Aggregation2] quit
# Assign GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, GigabitEthernet 1/0/3, and
GigabitEthernet 1/0/4 to the aggregate interface.
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port link-aggregation group 2
[Sysname-GigabitEthernet1/0/1] quit
[Sysname] interface gigabitethernet 1/0/2
[Sysname-GigabitEthernet1/0/2] port link-aggregation group 2
[Sysname-GigabitEthernet1/0/2] quit
[Sysname] interface gigabitethernet 1/0/3
[Sysname-GigabitEthernet1/0/3] port link-aggregation group 2
[Sysname-GigabitEthernet1/0/3] quit
[Sysname] interface gigabitethernet 1/0/4
[Sysname-GigabitEthernet1/0/4] port link-aggregation group 2

BFD MAD-enabled IRF configuration example

Network requirements
As shown in
Configure BFD MAD in the IRF fabric and set up BFD MAD links between each member device and the
intermediate device.
Figure 15, set up a four-chassis IRF fabric at the core layer of the enterprise network.
38