Troubleshooting - KitchenAid KCG0702 Manual

TROUBLESHOOTING

If your Burr Grinder should malfunction or fail to operate during use, please check
the following:
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
- Is the Burr Grinder plugged in? Check
to see if the Burr Grinder is plugged
into a grounded 3 prong outlet. If it is,
unplug the Burr Grinder, then plug it into
the same outlet again. If it still does not
work, check the fuse or circuit breaker on
the electrical circuit the Burr Grinder is
connected to and make sure the circuit is
closed. If it does not run after taking these
steps, a foreign object may be jamming
the cutting burrs. Refer to "Care and
cleaning" section for detailed information
on cleaning the cutting burrs.
10 | TROUBLESHOOTING
- If the Burr Grinder runs when switched
on, but coffee does not grind: The burrs
require cleaning or are worn. Refer
to "Care and cleaning" section for
detailed information on cleaning
the cutting burrs.
- If the Burr Grinder is operating normally,
but stops abruptly: Immediately turn
off the Burr Grinder. A coffee bean,
may have jammed the cutting burrs.
Refer to "Care and cleaning" section
for detailed information on cleaning
the cutting burrs.
- If the grind is too coarse, or the Burr
Grinder isn't producing an acceptable
range of grinds: Refer to the "Adjusting
the burrs for a finer or coarser grind"
section for more information.
If the problem is not due to one of
the above items, see the "Arranging
for Service" chapter in the "Warranty
and service"section.
Do not return the Burr Grinder to the
retailer, as they do not provide service.