Advertisement
1/2 X 3-1/4"
FIGURE 11
STEP 11:
¯ Insert two 2" SQ. END CAPS (26) into the ends of each PAD SUPPORT (3) as shown in FIGURE
¯ SECURELY assemble the two PAD SUPPORTS (3) to the CARRIAGE (16) as shown in FIGURE 11 using two 1/2 X 3-1/4"
BOLTS (41), four 1/2" WASHERS (32), and two 1/2" LOCKNUTS
(33).
¯ SECURELY assemble two SHOULDER PADS (17) to the PAD SUPPORTS (3) on the CARRIAGE (16) as shown in FIGURE
using four 3/8 X 3" BOLTS (37), four 3/8" LOCK WASHERS
(30), and four 3/8" WASHERS
(29).
13
Advertisement
