Panasonic DMR-EX75EG Service Manual page 23

Mode name
Magenta Picture Output Magenta picture is output with Component
Output from AV Decoder.
*Magenta picture
(Saturation rate: 100%)
*It is enable to switch Interlace/Progressive
by "I/P switch: [1] [4]"
RTSC Return in XP AV1 input signal is encoded (XP), decoded
(A & V) (XP) and output decoded signal to external
without DISC recording and DISC playback.
I/P Switch Switch Interlace and Progressive in EE
mode.
*Initial setting is "Interlace".
*This command is effective during executing
"White Picture Output", "Magenta Picture
Output" and "RTSC Return in XP (A & V)"
modes.
Audio Mute (XTMUTE) Check whether mute is applied normally by
the timer microprocessor.
Audio Mute (XDMUTE) Check whether mute is applied normally by
the Digital P.C.B..
Audio Pattern Output The audio pattern stored in the internal
memory is output
(Lch: 1kHz/-18dB)
(Rch: 400Hz/-18dB)
*Audio sound clock switching operation of
DAC can be confirmed by sub command [2]
[4].
Item
Description
DMR-EX75EG / DMR-EX75EC / DMR-EX75EB / DMR-EX85EG / DMR-EX85EB
FL display
*Initial mode is "Interlace".
Switch Interlace/Progressive
Initial mode: EE2/ Interlace/ XP/
Audio 48kHz
Switch Interlace/Progressive
Audio 44.1 kHz/ 48 kHz Switch
Initial mode is Interlace
Switch Interlace/Progressive
Initial mode (Audio 48kHz)
Audio 44.1kHz/48kHz switching
23
Key operation
(Remote controller key)
Press [1] [2] in service mode.
Press [1] [4] in Magenta Picture
Output mode.
*I/P are switched alternately.
Press [1] [3] in service mode.
Press [1] [4] in RTSC Return XP
mode.
*I/P are switched alternately.
Press [2] [4] in RTSC Return XP
mode.
*48 kHz / 44.1 kHz are switched
alternately.
Press [1] [4] in I/P Switch mode.
*I/P are switched alternately.
Press [2] [1] in service mode.
Press [2] [2] in service mode.
Press [2] [3] in service mode.
Press [2] [4] in Audio Pattern
Output mode.
*48 kHz / 44.1 kHz are switched
alternately.