Sony HCD-ZUX999 Service Manual page 26

HCD-ZUX999
[BPM RESET]
Procedure:
1. Press the [ ] button to turn the power on.
?/1
2. Press [BEAT SPEED] button and [ENTER] button at channel
A simultaneously.
3. When this button is operated, display as "BPM RESET" for a
while and all of the settings are reset.
[CHAIN, CHAIN B, CHAIN C, CHAIN D]
Procedure:
1. Press the [ ] button to turn the power on.
?/1
• CHAIN mode
2. Press [PAD 1] button and [PAD 2] button simultaneously.
3. The message "CHAIN 1 < – > 2" will be displayed on the
fl uorescent indicator tube.
4. The beats and the rhythm are changed by turning the [OPERA-
TION JOG] dial clockwise and counterclockwise.
• CHAIN B mode
5. Press [PAD 3] button and [PAD 4] button simultaneously.
6. The message "CHAIN 3 < – > 4" will be displayed on the
fl uorescent indicator tube.
7. The beats and the rhythm are changed by turning the [OPERA-
TION JOG] dial clockwise and counterclockwise.
• CHAIN C mode
8. Press [PAD 1] button and [PAD 4] button simultaneously.
9. The message "CHAIN 1 < – > 4" will be displayed on the
fl uorescent indicator tube.
10. The beats and the rhythm are changed by turning the [OPERA-
TION JOG] dial clockwise and counterclockwise.
• CHAIN D mode
11. Press [PAD 3] button and [PAD 2] button simultaneously.
12. The message "CHAIN 3 < – > 2" will be displayed on the
fl uorescent indicator tube.
13. The beats and the rhythm are changed by turning the [OPERA-
TION JOG] dial clockwise and counterclockwise.
[X-TRANCE DEMO MODE]
Procedure:
1. Press [ ] button to turn on the system.
?/1
2. Press [ENTER] button at channel A and [BEAT PATTERN]
button simultaneously.
3. The message "X-TRANCE PRO DEMO" will be displayed on
the fl uorescent indicator tube.
4. The Demo mode is entered.
5. To exit from this mode, press any button on the panel. "DEMO
OFF" will be displayed, exiting from the Demo mode.
26
[BD FACTORY MODE]
Procedure:
1. Press [ ] button to turn on the system.
@/1
2. Select CD function.
3. Press [ ] button at channel A, [MP3 BOOSTER] button and
x
[RETURN] button at channel B simultaneously.
4. "FACTORY MODE" will be displayed for a moment, entering
the mode.
• AGC mode
5. The AGC value is indicated each time the [
pressed.
"T RK _ AG XX "
"F CS – AG XX "
• RF GAIN mode
6. The RF GAIN value is indicated each time the [BEAT SPEED]
button is pressed.
• TRK ON/OFF
7. TRK is switched between TRK ON and OFF each time the
[AUDIO IN 2] button.
"––x1ON"
• PLAYING SPEED mode
8. The CD playing speed is changed as given below each time the
[SURROUND] button is pressed.
• S-CURVE ON/OFF mode
9. S-CURVE is switched between S-CURVE ON and OFF each
time the [GROOVE] button is pressed.
"– –x1 OFF "
Set value of the PLAYING SPEED
• LAST TrK + PLAY mode
10. The last track of the CD disk is played back by pressing the
[RETURN] button at channel A. However, the items 7, 8 and 9
must be at their normal settings.
• To exit from this mode
11. Press [ ] button at channel A, [MP3 BOOSTER] button and
x
[RETURN] button at channel B simultaneously.
CUE A] button is
i
"– –x1 ON "
XX: AGC value
"A Lx Y Y N"
"RW x Y Y N "
" ––x1 ON "
YY: GAIN value
"––x1OFF"
"––x1OFF"
"––x2OFF"
"––x4OFF"
"– –x1 OFF SC U RV E "