Table of Contents
Advertisement
NOTE: Specifications and others are subject to change without notice for improvement.
A
Scope
This standard can be applied to the DLP Projector related to FM73A Chassis.
A
Test Condition
1) Temperature: 25°C ± 5°C (Only CST is 40°C ± 2°C )
2) Relative Humidity: 65 ± 10%
3) Power Voltage: Standard input voltage (100-240V~, 50/60Hz)
4) Use the parts only designated in B.O.M.,PARTS SPEC.,or drawings.
5) Follow each drawing or spec for spec and performance of parts,based upon P/N of B.O.M
6) Warm up TV set for more than 30min. before the measurement.
A
Test and Inspection Method
1) Performance: Follow the Standard of LG TV test
2) RCA JACK performance: Follow the standard of LG
3) Standards of extra requirement
SAFETY: CB (EN55013),
Electric wave: CE (EN55020)
A
General Specification
No.
1
Video input applicable system
2
Power
3
Input Voltage
4
Market
5
Screen size
6
Aspect ratio
7
Operating Temperature
8
Operating Humidity
9
Storage Temperature
10
Storage Humidity
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATIONS
Item
1) NTSC M
2) NTSC 4.43
3) PAL
4) PAL M
5) PAL N
6) SECAM
7) NTSC-PB
SMPS
100V(-10%) - 240(+6%)V~, 50/60Hz
World wide
4:3
4:3
0
-20
Specification
Min
Typ
Max
40
75
60
85
- 6 -
Remark
Unit
3.579545 / 60Hz
4.433618 / 60Hz
4.433618 / 50Hz
3.575611 / 60Hz
3.582056 / 50Hz
4.286 / 50Hz
4.433618 / 60Hz
deg
%
deg
%
LGE Internal Use Only
Advertisement
Table of Contents
