Honda SPORTRAX 250X 2009 Owner's Manual page 172

０８／０８／０７ ２０：１７：５６ ３１ＨＮ６６８０ ０１７２
Emergency Wheel Removal/Installation
Refer to Saf ety Precautions
(1) wheel nuts
Removal
1. Park your ATV on a firm, level surface.
−
2. Loosen but do not remove
3. Raise the front (or rear) wheels off the ground and place a support
block under the vehicle.
4. Remove the wheel nuts.
5. Remove the wheel.
Avoid getting grease, oil, or dirt on the disc or pad surfaces when
removing and installing each wheel. Any contamination can cause
poor brake performance or rapid pad wear after reassembly.
If You Have a Flat Tire
on page 75
(1)
−
the wheel nuts ( ).
Taking Care of the Unexpected
.
(1)
(2)
(2) wheel rim
1
163