Sony HCD-S400 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Receiver
  5. HCD-S400
  6. Service manual
Sony HCD-S400 Service Manual

Sony HCD-S400 Service Manual

Compact av system
Hide thumbs
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL

Ver 1.4 2004. 09
HCD-S400 is the amplifier, DVD/CD and tuner
section in DAV-S400.
Amplifier section
Stereo mode
40 W + 40 W (6 ohms at 1 kHz, THD 10 %)
Surround mode
Front: 40 W + 40 W
Center*: 40 W
Rear*: 40 W + 40 W
(6 ohms at 1 kHz, THD 10 %)
Subwoofer*: 100 W
(3 ohms at 100 Hz, THD 10 %)
* Depending on the sound field settings and the source, there may be
no sound output.
Inputs (Analog)
AUDIO 1, 2:
Sensitivity: 150 mV
Impedance: 50 kilohms
Inputs (Digital)
AUDIO 2 (optical):
Sensitivity: –
Outputs (Analog)
AUDIO 1 (AUDIO OUT):
Voltage: 2 V
Impedance: 1 kilohms
PHONES:
Accepts low- and high-impedance headphones
Super Audio CD/DVD system
Laser
Semiconductor laser
(Super Audio CD/DVD: λ = 650 nm)
(CD: λ = 780 nm)
Emission duration: continuous
Frequency response (at 2CH STEREO mode)
DVD (PCM): 2 Hz to 22 kHz (±1.0 dB)
CD: 2 Hz to 20 kHz (±1.0 dB)
Signal-to-noise ratio
More than 80 dB
(AUDIO 1 (AUDIO) connectors only)
Harmonic distortion
Less than 0.03 %
Sony Corporation
9-873-961-05
Audio Group
2004I02-1
Published by Sony Engineering Corporaton
© 2004.09
HCD-S400
Model Name Using Similar Mechanism
Mechanism Type
Base Unit Name
Optical Pick-up Name
SPECIFICATIONS
FM tuner section
System
Tuning range
Antenna
Antenna terminals
Intermediate frequency
AM tuner section
System
Tuning range
Antenna
Intermediate frequency
Video Section
Outputs
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
AEP Model
UK Model
HCD-S500/S800
CDM55C-DVBU8
DVBU8
KHM-240AAA
PLL quartz-locked digital synthesizer system
87.5 – 108.0 MHz (50 kHz step)
FM wire antenna
75 ohms, unbalanced
10.7 MHz
PLL quartz-locked digital synthesizer system
531 – 1,602 kHz (with the interval set at 9 kHz)
Loop antenna
450 kHz
Video: 1 Vp – p, 75 ohms
220 – 240 V AC, 50/60 Hz
98 W
2 W (in the standby mode)
355 x 70 x 378 mm (w/h/d) incl.
projecting parts
4.0 kg
5°C to 35°C
5 % to 90 %
— Continued on next page —
COMPACT AV SYSTEM

Advertisement

Table of Contents
loading

Related Manuals for Sony HCD-S400

Summary of Contents for Sony HCD-S400

  • Page 1: Service Manual

    HCD-S400 SERVICE MANUAL AEP Model UK Model Ver 1.4 2004. 09 HCD-S400 is the amplifier, DVD/CD and tuner section in DAV-S400. Model Name Using Similar Mechanism HCD-S500/S800 Mechanism Type CDM55C-DVBU8 Base Unit Name DVBU8 Optical Pick-up Name KHM-240AAA SPECIFICATIONS Amplifier section...
  • Page 2 MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS LASER DIODE AND FOCUS SEARCH OPERATION APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS CHECK PUBLISHED BY SONY.

  • Page 3: Table Of Contents

    HCD-S400 Ver 1.2 2003.01 TABLE OF CONTENTS 1. SERVICING NOTE 6-9. Schematic Diagram – DVD (4/8) Section – ··············· 32 ·························································· 3 6-10. Schematic Diagram – DVD (5/8) Section – ··············· 33 6-11. Schematic Diagram – DVD (6/8) Section – ··············· 34 2.
  • Page 4 HCD-S400 Ver 1.4 HOW TO OPEN THE DISC TRAY WHEN POWER SWITCH TURNS OFF 2 Pull-out the disc tray. Hole of chassis 1 Turn the cam in the direction of the arrow. When removing the disc tray, high torque is necessary to turn the ejection cam on the bottom surface.

  • Page 5: General

    HCD-S400 SECTION 2 This section is extracted GENERAL from instruction manual. Index to Parts and Controls For more information, refer to the pages indicated in parentheses. Front Panel POWER switch/indicator (30) x (stop) (30) PHONES jack (30) Disc tray (30)
  • Page 6 HCD-S400 This section is extracted from instruction manual. TV 1/= (on/standby) (57) Remote Z OPEN/CLOSE (30) NAME (60) STEREO/MONO (59) MEMORY (28) CLEAR (35) PLAY MODE (34) AUDIO (44) ANGLE (49) SUBTITLE (50) VOL +/– (58) ./>, PREV/NEXT, TV CH +/–, PRESET +/–...

  • Page 7: Disassembly

    HCD-S400 SECTION 3 DISASSEMBLY • The equipment can be removed using the following procedure. Case (Top) Front panel section DVD mechanism deck (CDM55C-DVBU8) Loading board, Motor (LD) assy (M901) RF-240 board Tray Optical pick-up (KHM-240 AAA) Note: Follow the disassembly procedure in the numerical order given.
  • Page 8 HCD-S400 3-3. DVD MECHANISM DECK (CDM55C-DVBU8) 1 Two screws (DIA. 2.6 × 8) 6 Screw 2 MD cover (+BVTP 3 × 8) 8 Mechanism deck (CDM55C-DVBU8) 5 Flexible flat cable (25 core) (CN010) 4 Flexible flat cable (9 core) (CN009)
  • Page 9 HCD-S400 3-5. RF-240 BOARD 2 Flexible flat cable (26P) 4 RF-240 board (CN001) 1 Flexible flat cable (25 core) (CN002) 3 Two screws (+BTP 2.6 × 6) 3-6. TRAY 1 While pushing the two protrusions, release the two claws fixing the tray and pull out the tray in the direction of the arrow A .
  • Page 10 HCD-S400 3-7. OPTICAL PICK-UP (KHM-240AAA) Please refer to the SERVICING NOTE for the cleaning method of the optical pick-up. 8 Three insulators 4 Step screw (L) 5 Two step screws (M) 2 Flexible flat cable 9 Optical pick-up (9 core)

  • Page 11: Test Mode

    HCD-S400 SECTION 4 TEST MODE 4-5. OSD TEST MODE 4-1. VERSION DISPLAY MODE Procedure: Press the A button on the main unit or 1 button on the Procedure: Press the A button on the main unit or 1 button on the remote commander to turn the set on.
  • Page 12 HCD-S400 4-8. SYSCON DIAGNOSIS [PREV] Press x key to quit the diagnosis, or key to repeat the The same contents as board detail check by serial interface can be [NEXT] same item where an error occurred, or key to continue the checked from the remote commander.
  • Page 13 HCD-S400 Data write → read, and accord check 3. Peripheral Error 09: ARP ←→ RAM data bus error (3-2) EEPROM Check Data 0x0001 to 0x8000 where one bit each is set to 1 are Data write → read, and accord check...
  • Page 14 HCD-S400 6. AV Decoder Check Items List (6-2) 1930 RAM 2) Version Data write → read, and accord check (2-2)Revision Error 13: AVD RAM read data discord (2-3)ROM Check Sum The program code data stored in ROM (IC107 or IC108) (2-4)Model Type are copied to all areas oo»RAM (IC504, IC505) connected...
  • Page 15 HCD-S400 4-9. DRIVE AUTO ADJUSTMENT 21. EQ Boost Adjust 22. Auto LFO Adjust 23. Auto Track Gain Adjust, Search Check On the Test Mode Menu screen, press key on the remote commander, and the drive auto adjustment menu will be displayed.
  • Page 16 HCD-S400 3. DVD-DL (dual layer) 4. LCD/SACD [ENTER] [ENTER] Select , insert DVD dual layer disc, and press key, Select , insert SACD disc, and press key, and the and the adjustment will be made through the following steps, then adjustment will be made through the following steps, then adjusted adjusted values will be written to the EEPROM.
  • Page 17 HCD-S400 On this screen, select the disc type. To select the disc type, press the number of the loaded disc. The selected disc type is displayed at the 1. Set correctly the disc type to be used on the Disc Type bottom.
  • Page 18 HCD-S400 2. Servo Control 6. Memory Check Servo Control EEPROM Data1 1. LD Off R.Sled FWD -– DL –- 2. SP Off L.Sled REV CD LCD 3. Focus Focus Gain xx xx 4. TRK. TRK. Gain xx xx 5. Sled...
  • Page 19 HCD-S400 4-12. EMERGENCY HISTORY 33: Focus bias adjustment error 34: Focus gain adjustment error 35: Tilt servo adjustment error ### EMG. History ### 36: RF equalizer adjustment error Laser Hours xxxxxxxh 37: RF group delay adjustment error xxxxxxxh 38: Jitter value after adaptive servo operation is too large.

  • Page 20: Electrical Adjustment

    HCD-S400 SECTION 5 Ver 1.3 2003.02 ELECTRICAL ADJUSTMENT 5-1. ADJUSTMENT OF VIDEO SYSTEM In making adjustment, refer to 5-2. Adjustment Related Parts Arrangement. 1. Video Level Adjustment (DVD BOARD) <Purpose> RE-ADJUSTMENT OF THE SERVO CIRCUIT This adjustment is made to satisfy the NTSC standard, and if not The re-adjustment of the servo circuit is necessary adjusted correctly, the brightness will be too large or small.

  • Page 21: Diagrams

    HCD-S400 SECTION 6 DIAGRAMS WAVEFORMS THIS NOTE IS COMMON FOR PRINTED WIRING – DVD BOARD – – AMP BOARD – – I/O BOARD – BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.)

  • Page 22: Block Diagrams

    HCD-S400 6-2. BLOCK DIAGRAMS – RF/SERVO, VIDEO SECTION – CN404 OPTICAL PICK-UP TEST (KHM-240 AAA) CONNECTOR IC503 IC001 IC302 AV DECODER DVD/CD RF AMP IC701 SERVO DSP DIGITAL SERVO VIDEO AMP HD8-15 HD0-15 RF IN SIGO RFIN1 D0-7 HD0-15 75Ω...

  • Page 23: Cpu Section

    HCD-S400 – CPU SECTION – IC600 INPUT SEL J600 (1/2) AUX1 IC603 AUDIO R-CH IC606 DIGITAL AUDIO AUX2 10 9 I/F RECEIVER AUDIO DIN1 SPDIF R-CH IC602 AUDIO RF/SERVO SPDIF DIN0 A/D CONV SECTION Q604 ASEL2 DOUT DIGDI XMCK SYSCLK...

  • Page 24: Power Section

    HCD-S400 – POWER SECTION – IC305 IC301 STREAM PROCESSOR POWER DRIVER (F) J401 (1/3) L401,C451 DATA OUTL1+ OUTA OUTL2+ FRONT L +27V L401,C452 IC302 OUTB OUTR1+ R-CH L402,C453 OUTR2+ R-CH DIAG IC303 I/O,SYSTEM XFS1 +3.3V REAR L 3,3V BCKO L402,C454...

  • Page 25: Printed Wiring Board - Rf-240 Section

    HCD-S400 6-3. PRINTED WIRING BOARD – RF-240 SECTION – • See page 21 for Circuit Boards Location. RF-240 BOARD (SIDE A) RF-240 BOARD (SIDE B) BOARD CN010 (Page 27) • Semiconductor Location Ref. No. Location D001 D004 IC001 Q001 Q002...

  • Page 26: Schematic Diagram - Rf-240 Section

    HCD-S400 6-4. SCHEMATIC DIAGRAM – RF-240 SECTION –...

  • Page 27: Printed Wiring Board - Dvd Section (1/2)

    HCD-S400 Ver 1.2 2003.01 6-5. PRINTED WIRING BOARD – DVD SECTION (1/2) – • See page 21 for Circuit Boards Location. S901 SWITCHING POWER DVD BOARD (SIDE A) REGURATOR SUPPLIED AS THE AC IN ASSEMBLED BLOCK • Semiconductor Location Ref. No.

  • Page 28: Printed Wiring Board - Dvd Section (2/2)

    HCD-S400 – DVD SECTION (2/2) – • See page 21 for Circuit Boards Location. DVD BOARD (SIDE B) • Semiconductor Location Ref. No. Location D900 D902 IC001 IC003 IC006 IC102 IC108 IC303 IC304 IC401 IC501 IC504 IC505 IC600 IC601 IC602...

  • Page 29: Schematic Diagram - Dvd (1/8) Section

    HCD-S400 6-6. SCHEMATIC DIAGRAM – DVD (1/8) SECTION –...

  • Page 30: Schematic Diagram - Dvd (2/8) Section

    HCD-S400 6-7. SCHEMATIC DIAGRAM – DVD (2/8) SECTION –...

  • Page 31: Schematic Diagram - Dvd (3/8) Section

    HCD-S400 6-8. SCHEMATIC DIAGRAM – DVD (3/8) SECTION –...

  • Page 32: Schematic Diagram - Dvd (4/8) Section

    HCD-S400 Ver 1.2 2003.01 6-9. SCHEMATIC DIAGRAM – DVD (4/8) SECTION –...

  • Page 33: Schematic Diagram - Dvd (5/8) Section

    HCD-S400 6-10. SCHEMATIC DIAGRAM – DVD (5/8) SECTION – • See page 53 for IC Pin Function Description.

  • Page 34: Schematic Diagram - Dvd (6/8) Section

    HCD-S400 6-11. SCHEMATIC DIAGRAM – DVD (6/8) SECTION – • See page 50 for IC Pin Function Description.

  • Page 35: Schematic Diagram - Dvd (7/8) Section

    HCD-S400 6-12. SCHEMATIC DIAGRAM – DVD (7/8) SECTION –...

  • Page 36: Schematic Diagram - Dvd (8/8) Section

    HCD-S400 6-13. SCHEMATIC DIAGRAM – DVD (8/8) SECTION – • See page 50 for IC Pin Function Description.

  • Page 37: Printed Wiring Board - Amp Section

    HCD-S400 6-14. PRINTED WIRING BOARD – AMP SECTION – • See page 21 for Circuit Boards Location. SPEAKER REAR R FRONT R WOOFER CENTER REAR L FRONT L AMP BOARD (SIDE A) AMP BOARD (SIDE A) D351 R486 R476 HP–1030...

  • Page 38: Schematic Diagram - Amp Section (1/2)

    HCD-S400 6-15. SCHEMATIC DIAGRAM – AMP SECTION (1/2) –...

  • Page 39: Schematic Diagram - Amp Section (2/2)

    HCD-S400 6-16. SCHEMATIC DIAGRAM – AMP SECTION (2/2) –...

  • Page 40: Printed Wiring Board - I/O Section

    HCD-S400 6-17. PRINTED WIRING BOARD – I/O SECTION – • See page 21 for Circuit Boards Location. I/O BOARD (SIDE B) AUDIO IN AUDIO IN • Semiconductor AUDIO IN AUDIO IN AUDIO OUT Location DIGITAL IN Ref. No. Location I/O BOARD...

  • Page 41: Schematic Diagram - I/O Section

    HCD-S400 6-18. SCHEMATIC DIAGRAM – I/O SECTION –...

  • Page 42: Printed Wiring Board - Panel Section

    HCD-S400 6-19. PRINTED WIRING BOARD – PANEL SECTION – • See page 21 for Circuit Boards Location. BOARD (Page 27) FP–1030 BOARD 1-681-989- (22) HP–1030 BOARD DDCON–1030 BOARD PW–1030 BOARD BOARD 1-681-990- 1-681-994- (22) (Page 37) (22) RR–1030 BOARD (22) 1-681-996- FU–1030 BOARD...

  • Page 43: Schematic Diagram - Panel Section

    HCD-S400 6-20. SCHEMATIC DIAGRAM – PANEL SECTION –...

  • Page 44: Schematic Diagram - Loading Section

    HCD-S400 6-23. IC BLOCK DIAGRAMS 6-21. SCHEMATIC DIAGRAM – LOADING SECTION – IC102 SM8707EV-G-E2 (DVD BOARD) IC608 PCM1748E/2K (DVD BOARD) System Clock System Clock MCLK Manager Serial Input DATA 8x Oversampling Digital Filter LRCK with Function Controller Function Control DGND...
  • Page 45 HCD-S400 IC602 PCM1800E/2K (DVD BOARD) 24 AGND 23 VCC 22 C_PL 21 C_NL 20 C_PR 19 C_NR 18 VDD Single-End/ 5th-Order LIN 1 17 DGND Differential Delta-Sigma Converter Modulator (–) 16 SYSCLK x1/64 V_REF_1 Decimation DOUT Serial Data REF COM...
  • Page 46 HCD-S400 IC600 MC14052BDR2 (I/O BOARD) IC701 BA7666FS-E2 (I/O BOARD) MUTE MUTE OUTA1 75Ω BIAS OUTA2 BINARY TO 1-OF-4 LEVEL DECODER WITH CONVERTER INHIBIT 75Ω OUTB1 BIAS OUTB2 N.C. N.C. 75Ω OUTC1 BIAS OUTC2 IC604 BU1924F-E2 (I/O BOARD) 12 11 10...
  • Page 47 HCD-S400 IC001 SP3728AC (RF-240 BOARD) FULL WAVE CHARGE RECTIFIER PUMP RFIP SDEN PROGRAMABLE EQ FILTER RFIN SCLK BOTTOM WABLE BPF TZIN PHASE DETECTOR PHASE DETECTOR SERIAL PORT REGISTER BYP2 PEAK/ MIRR BOTTOM HOLD...

  • Page 48: Ic Pin Function Description

    HCD-S400 6-24. IC PIN FUNCTION DESCRIPTION • IC103 MB91307APFV-G-BND-E1 (SYSTEM CONTROL) (DVD BOARD) Pin No. Pin Name Description 1 to 5 HA17 to 21 Address signal output HA22 Address signal output (Not used) I2C EEPROM write protect signal output TRM/XKRCS...
  • Page 49 HCD-S400 Pin No. Pin Name Description – Power supply CKSW1 Chucking switch (Tray SW1) signal input OCSW1 Open/Close switch (Tray SW2) signal input CS0X Chip select signal output to external ROM CS1X – Not used (Open) CS2X Chip select signal output to AVD SDRAM...
  • Page 50 HCD-S400 • IC302 CXD9635R (SERVO DSP) (DVD BOARD) Pin No. Pin Name Description – Ground 2 to 9 D0 to D7 System data bus VDD_3.3V – Power supply 3.3V 11 to 15 A0 to A4 System address bus – Ground...
  • Page 51 HCD-S400 Pin No. Pin Name Description VCD control input VCD outside resistance 1 VCD outside resistance 2 VDDA4_3.3V – Power supply VSSA3 – Analog Ground OP amp positive input OP amp negative input Feedback resistance 3 Feedback resistance 2 Feedback resistance 1 OP amp output VDDA3_3.3V...
  • Page 52 HCD-S400 Pin No. Pin Name Description JITPWM Jitter PWM output LOCK EFM lock detection (Not used) VDD1_1.8V – Power supply 1.8V GIO0/INT2 Optical pick-up block limitt signal input GIO1/INT3 Spindle motor mute signal output GIO2/INT4 TSDM signal output GIO3/INT5 Not used (Open) VDD_3.3V...
  • Page 53 HCD-S400 • IC801 CXD2752R (PLAYBACK SIGNAL PROCESSOR) (DVD BOARD) Pin No. Pin Name Description VSCA0 – Ground XMSLAT Latch signal input for MB9130APFV MSCK Shift clock input for MB9130APFV MSDATI Data input for MB9130APFV VDCA0 – Power supply MSDATO Data output for MB9130APFV...
  • Page 54 HCD-S400 Pin No. Pin Name Description VDDSD0 – Power supply (+3.3V) ZDFC Not used (Open) DSAC Cch DSD data output ZDFLFE Not used (Open) DSALFE LFEch DSD data output VSDSD1 – Ground ZDFLS Not used (Open) DSALS LSch DSD data output...
  • Page 55 HCD-S400 Pin No. Pin Name Description VSIOA3 – Not used (Open) DCLK Clock output terminal for SDRAM DCKE Clock enable signal output for SDRAM Write enable signal output for SDRAM XCAS Column address strobe signal output for SDRAM XRAS Row address strobe signal output for SDRAM VDIOA3 –...

  • Page 56: Exploded Views

    HCD-S400 SECTION 7 EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may The components identified by mark 0 or have some difference from the original one. dotted line with mark 0 are critical for safety. Replace only with part number specified.

  • Page 57: Front Panel Section

    HCD-S400 7-2. FRONT PANEL SECTION S901 not supplied supplied Supplied with S800 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No. Description Remark Ref.

  • Page 58: Chassis Section

    HCD-S400 7-3. CHASSIS SECTION Supplied as the assembled block CDM55C -DVBU8 not supplied supplied The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No.

  • Page 59: Mechanism Deck Section (Cdm55C-Dvbu8)

    HCD-S400 Ver 1.2 2003.01 7-4. MECHANISM DECK SECTION (CDM55C-DVBU8) supplied M901 not supplied The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No. Description Remark Ref.

  • Page 60: Electrical Parts List

    HCD-S400 SECTION 8 Ver 1.2 2003.01 ELECTRICAL PARTS LIST Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks NOTE: • Due to standardization, replacements in the • RESISTORS The components identified by parts list may be different from the parts All resistors are in ohms.
  • Page 61 HCD-S400 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C412 1-136-157-00 FILM 0.022uF D385 6-500-055-01 DIODE P6SMB33AT3 C413 1-136-165-00 FILM 0.1uF < EARTH TERMINAL > C414 1-136-165-00 FILM 0.1uF C415 1-162-970-11 CERAMIC CHIP 0.01uF EB301 1-537-738-21 TERMINAL, EARTH...
  • Page 62 HCD-S400 DDCON-1030 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < RESISTOR > 1-681-990-22 DDCON-1030 BOARD *************** R300 1-216-833-11 METAL CHIP 1/16W R301 1-216-823-11 METAL CHIP 1.5K 1/16W < CAPACITOR > R302 1-216-857-11 METAL CHIP 1/16W...
  • Page 63 HCD-S400 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C107 1-164-850-11 CERAMIC CHIP 10PF 0.50PF 50V C408 1-164-874-11 CERAMIC CHIP 100PF C108 1-164-854-11 CERAMIC CHIP 15PF C411 1-164-941-11 CERAMIC CHIP 0.0047uF 10% C109 1-164-947-11 CERAMIC CHIP 0.01uF...
  • Page 64 HCD-S400 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C606 1-126-206-11 ELECT CHIP 100uF 6.3V C669 1-164-947-11 CERAMIC CHIP 0.01uF C607 1-107-820-11 CERAMIC CHIP 0.1uF C670 1-164-947-11 CERAMIC CHIP 0.01uF C608 1-107-820-11 CERAMIC CHIP 0.1uF C671 1-164-947-11 CERAMIC CHIP 0.01uF...
  • Page 65 HCD-S400 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks CN004 1-784-376-11 CONNECTOR, FFC/FPC 17P IC005 8-759-460-72 IC BA033FP-E2 CN005 1-784-374-21 CONNECTOR, FFC/FPC 15P IC006 6-700-398-01 IC uPC2918T-E1 CN008 1-794-032-21 PIN, CONNECTOR (PC BOARD) 11P IC101 8-759-640-41 IC BR24C08F-E2...
  • Page 66 HCD-S400 Ver 1.2 2003.01 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R009 1-218-953-11 RES-CHIP 1/16W R166 1-218-961-11 RES-CHIP 4.7K 1/16W R011 1-218-949-11 RES-CHIP 1/16W R167 1-218-953-11 RES-CHIP 1/16W R060 1-216-864-11 METAL CHIP 1/16W R168 1-218-953-11 RES-CHIP...
  • Page 67 HCD-S400 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R411 1-218-974-11 RES-CHIP 1/16W R619 1-218-973-11 RES-CHIP 1/16W R412 1-218-982-11 RES-CHIP 270K 1/16W R620 1-218-941-81 RES-CHIP 1/16W R413 1-218-965-11 RES-CHIP 1/16W R621 1-218-941-81 RES-CHIP 1/16W R414 1-218-985-11 RES-CHIP...
  • Page 68 HCD-S400 FP-1030 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R955 1-218-965-11 RES-CHIP 1/16W R695 1-218-941-81 RES-CHIP 1/16W R956 1-218-965-11 RES-CHIP 1/16W R696 1-218-945-11 RES-CHIP 1/16W R957 1-218-965-11 RES-CHIP 1/16W R699 1-218-941-81 RES-CHIP 1/16W R959 1-218-953-11 RES-CHIP...
  • Page 69 HCD-S400 FP-1030 FU-1030 HP-1030 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks FB800 1-414-813-11 FERRITE J900 1-566-891-21 JACK (PHONES) FB801 1-414-813-11 FERRITE FB802 1-414-813-11 FERRITE < COIL > < FLUORESCENT INDICATOR TUBE > L900 1-410-387-11 INDUCTOR CHIP 33uH...
  • Page 70 HCD-S400 LOADING Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C662 1-126-964-11 ELECT 10uF R611 1-216-809-11 METAL CHIP 1/16W C671 1-164-156-11 CERAMIC CHIP 0.1uF R612 1-216-839-11 METAL CHIP 1/16W C672 1-164-156-11 CERAMIC CHIP 0.1uF R613 1-216-833-11 METAL CHIP...
  • Page 71 HCD-S400 PW-1030 RF-240 RR-1030 SW(A)-1030 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 1-681-994-22 PW-1030 BOARD < COIL > ************ L001 1-412-031-11 INDUCTOR CHIP 47uH 4-237-280-01 CAP, LED L002 1-412-031-11 INDUCTOR CHIP 47uH < DIODE >...
  • Page 72 HCD-S400 Ver 1.2 2003.01 SW(B)-1030 Ref. No. Part No. Description Remarks 1-681-993-22 SW (B)-1030 BOARD *************** < CONNECTOR > CN812 1-506-481-11 PIN, CONNECTOR 2P < SWITCH > S806 1-786-348-21 SWITCH, KEY BOARD (OPEN/CLOSEA) ********************************************************************** MISCELLANEOUS ************* 1-770-019-51 ADAPTOR, CONVERSION PLUG...
  • Page 73 HCD-S400 MEMO...
  • Page 74 HCD-S400 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2002.04...

Table of Contents