18. UNPACKING PROCEDURE
18.1 Unpacking and Set-up Procedure for the 1550
A. Unpacking Procedure
1. Open the carton and take out the accessory
package and other packing materials. The ac-
cessory package includes the following parts:
•
Copy receiving tray
•
Set-up report (U.S.A., Canada, Europe)
•
Operator's manual
•
Fuser unit lever caps (2 pcs.)
•
Set-up instruction
2. Open the plastic bag and holding the lifting
bands, take out the machine from the carton.
3. Remove all packing materials from the outside
and inside of the machine.
4. Pull out the cassette and take out the packing
material located at the front side.
5. Remove the screw fastening the carriage.
Note: For the screw fastening the carriage, a
coin screw is used. So, after loosening
it with a suitable coin, the screw can be
removed by manually turning it.
•
Remove the carriage fastening screw lo-
cated in the left-top cover.
Mar. 1998 © TOSHIBA
Accessories
Coin screw
18 - 1
1550/1560 UNPACKING PROCEDURE
Lifting bands
Plastic bag