Along the bottom of the screen there are six navigation and control buttons these are from left to
right:
1. Home:
2. Alarm:
3. Settings:
4. Totals:
5. System Screens:
6. Shut Down:
Alarm Message Window
Figure 23: Alarm Message Window
When the alarm button is pressed the message window as shown in figure 23 will be shown this will
display any of the alarms that are activated by the WSB a list of these alarms are below:
Alarms
ID
Text
1 WSB1 Component 1 Alarm
2 WSB1 Component 2 Alarm
3 WSB1 Component 3 Alarm
4 WSB1 Component 4 Alarm
5 WSB1 Component 5 Alarm
6 WSB1 Component 6 Alarm
7 WSB1 Component 7 Alarm
8 WSB1 Component 8 Alarm
9 WSB1 Component 9 Alarm
Ref: S7-1200-12-12-WSB
Siemens S7-1200 interfacing via HMS Anybus Gateway
Changes the screen to the one shown in figure 22.
Opens alarm message window.
Opens the settings screen.
Opens the material totals screen.
Opens a series of Standard Siemens System Screens
Shuts down running software on HMI ready for turning off power.
Berkshire Systemic Solutions Ltd
www.bss-ltd.biz
to Maguire 12-12 Weigh Scale Blender
Page 38 of 44
V1.00