Basic Functions; Making Calls; Speakerphone; Pause - Pantech DM P100 User Manual

BASIC FUNCTIONS

MAKING CALLS

1. Enter a phone number and press
NOTE:
CH 2
TO MODIFY PHONE NUMBERS AFTER ENTERING:
• ERASE ONE CHARACTER AT A TIME BY PRESSING
• TO ERASE THE ENTIRE NUMBER, PRESS AND HOLD
2. will appear on the display screen as your call is
being connected.
NOTE:
• IF "CALL FAILED" MESSAGE APPEARS ON THE PHONE'S SCREEN OR THE
LINE IS BUSY, PRESS
• WHEN MAKING OR RECEIVING CALLS FROM STORED NUMBERS, BOTH THE
CONTACT NAME AND NUMBER WILL BE DISPLAYED.
• YOU CAN MAKE CALLS THROUGH THE VR MODE, WHICH IS CALLED "VAD
(VOICE-ACTIVATED DIALING)." PLEASE REFER TO CHAPTER 4: VOICE DIAL
FOR MORE DETAILS.
3. End calls by pressing
20
[SEND] to dial.
.
.
OR .
[END] to hang up.
BASIC FUNCTIONS

SPEAKERPHONE

This feature allows you to listen through the speaker
and talk hands-free.
1. To activate the speakerphone in Idle, Answering or
Calling Modes, press .
2. Speakerphone Mode will deactivate after ending
a call or when the phone is powered off and then on
again.

PAUSE

This feature allows you to dial or save phone
numbers that include additional extensions or groups
of numbers.
1. To insert a pause, enter a phone number then press
[OPTIONS]. Select either a Hard Pause (P) or a
Timed Pause (T) and continue entering any additional
numbers.
2. Press to dial [SEND] or [SAVE] to store.
Please refer to Chapter 4: Contacts for more details
about storing phone numbers.
NOTE:
THIS FEATURE IS USED FOR AUTOMATED SYSTEMS (I.E., VOICEMAIL, CALLING
CARDS) WHEN GROUPS OF NUMBERS OR SPECIAL CODES ARE REQUIRED.
AFTER THE PHONE NUMBER, INSERT A PAUSE TO ADD ADDITIONAL NUMBERS,
WHICH WILL THEN BE DIALED AUTOMATICALLY AFTER THE PAUSE.
CH 2
21