Sony MP-CL1A Startup Manual page 21

• Sony is not liable for problems
with your PC, cell phone or other
hardware arising from the use of
the projector; the suitability of
the product for specific hardware,
software, or peripherals;
operating conflicts with other
installed software; data loss; or
other accidental or unavoidable
damages.
• Sony is not liable for financial
damages, lost profits, claims
from third parties, etc., arising
from the use of the projector.
• If a malfunction occurs, stop use
and contact your Sony dealer or
authorized Sony service facility.
• HDMI/MHL cable is not supplied.
Recommend to use Sony High
Speed HDMI cable. Apple devices
require an Apple Digital AV
adapter (sold separately).
• When the projector body gets
warm with use, the  (power)
lamp (white) blinks or the 
(power) lamp (white) and the
(charge) lamp (red) blink at
the same time. In this case, stop
using the projector.
• Keep the distance between your
device and the projector at 10 m
or less when you connect your
device to the projector via a
Bluetooth connection.
The effective range of the
Bluetooth connection may
become shorter depending on
the conditions.
• Use the projector in a place
where there is no dust or
cigarette smoke because the
projector is a precision apparatus.
• Before use, take the projector out
of the carrying porch.
• Use on a stable or flat surface
when using the projector with
the lens cover stand.
• Do not place the projector close
to credit and other cards. Doing
so may result in the loss of
recorded data.
21
EN