Notes On Use - Sony MP-CL1A Startup Manual

Beam divergence: 4.5 mrad.
Pulse Frequency: 60 Hz
Output : 206 mW
FOV (horizontal): 42.1°
Input: DC5 V/1.5 A
Li-ion Battery: DC3.8 V/3400
mAh
Charging time: Via AC power
adaptor (not supplied): Approx.
3.3 hours
Via USB Type A port:
Approx. 6.3 hours
Output: DC5 V/1.5 A, 1 port
* Bluetooth profiles are standardized
1
according to the purpose of the
Bluetooth device.
* Codec indicates the audio signal
2
compression and conversion
format.
* SBC stands for Subband Codec.
3

Notes on Use

• Do not point the laser light at a
mirror, etc. as the reflected laser
light may be harmful to eyes.
• Do not use the projector in areas
where the use of wireless
communications devices is
prohibited, such as on airplanes
or in hospitals. The projector
emits radio wave and may affect
electronic and medical
appliances (pacemakers, etc.).
• Do not operate the unit if it has
been wet or otherwise damaged,
to prevent against electric shock,
explosion and/or injury.
• Magnetic or electric noise may
cause the noise from the
projector to become louder or
interfere with its wireless
communications.
• While using, TV, radio or tuner
interference may occur. Use the
projector away from these
products.
• Access points may not be
discovered correctly when there
are multiple Wi-Fi access points
that use the same channel.
• Children should only use the
projector under adult
supervision. Keep the projector
out of reach of infants.
• Do not block the ventilation holes
with hands, etc. When using the
projector, be sure to use the
stand (supplied) to prevent the
ventilation holes from being
blocked. Failure to do so would
be dangerous as it may result in
overheat of the projector.
• Do not put any foreign objects in
the ventilation holes.
• Do not insert your fingernails into
the ventilation holes and other
slots, nor hook your fingernails
on the gaps while using the
projector.
19
EN