Using 3-Point Hitch; Drawbar Hitch - Yanmar EF312T Operator's Manual

14. Using 3-point hitch

3-point rear hitch type is Category 1.
Top link
Adjust length of top link (A) to implement. Loosen
lock nut turn turnbuckle on top link and adjust the
length.
Follow instructions of implements.
Lift link and lower link
Set lower link hole and lift link hole according to
implement and work.
Lower link hole
Refer to the
instruction of
(1)
implement
(2)
Never use the combination of hole (2) and hole (3).
Check chain
Check chain adjustment.
(1) For implements such as a plough, harrow and
subsoil plow, adjust check chains so as an
implement could be swung about 5 cm. Make sure
that lower ling does not hit tire.
(2) For implements such as a rotary tiller and mower,
adjust check chains so as implement does not
swing, but not too tight.
IMPORTANT
When an implement is not attached to tractor, tie lower
links to avoid from hitting rear tire while driving.

15. Drawbar hitch

Use Drawbar when towing a trailer.
Lift link hole Remarks
Standard 3-P
(5) Special 3-P
(A) Top link
(B) Lift link
(C) Check chain
(A) Drawbar
42
(C) Lower link
(D) Check chain
(E)
OPE_EF312T&352T_en.doc