Seat Belts - Mercedes-Benz 410 D Operating Instructions Manual

1 Tongue
2 Bucl<le
3 Button
10
2.3 Seat belts (example)
These instructions are only applicable to belts which were installed at the
manufacturing plant of the vehicle. Forv subsequent installation use only seat belts
app roved by us.
Notes:
- Use each safety belt for only one person.
- Three-po int be lts are not intended for children up to a size of approx.
140 cm.
- Seat belts which are subjected to severe strain during an accident must be
renewed. Inspect belt anchorages.
- Renew damaged seat belts.
- Changes which impair the effectiveness of the belt may not be carried out. ·
- Belt webs may not be directed over sharp edges.
- For cleaning and care of belt webbing, refer to section 5. 13.
Seat belts with inertial reels
Three-point seat belt
Fastening:
- Pull be lt with tong ue (1) over shoulder and lap. The belt must not be twisted.
- Press tongue (1) into buckle (2) and allow to engage audib ly.
- The belt must be tight. Check this cond ition immediately after having fastened it
and regularly wh ile driving. If necessary , tension lap belt by pulling the upper
be lt section upwards.
Unfastening:
- Push red button (3) in buck le.
- Return tongue ( 1 ) to initial position.