Management Ethernet Port Led - HP 5500 HI Series Installation Manual

System status LED
(SYS) status
Steady green
The seven-segment LED, the system status LED, and the port mode LED on the 5500-24G-PoE+-4SFP HI (2
slots), 5500-24G-PoE+-4SFP
5500-48G-PoE+-4SFP HI TAA (2 slots) that supports PoE can display the PoE power consumption
percentage of the switch. For relevant information, see
Table 18 Seven-segment LED description (II)
LED
Unit

Management Ethernet port LED

The management Ethernet port has a port LED to show its operating status and activities. The port mode
LED indicates the type of information that the port LED is showing.
Table 19 Management Ethernet port LED description
Port mode LED
(Mode) status
Steady green (rate
mode) or flashing
green ( 1 Hz, PoE
mode)
Seven-segment LED (Unit) status
The LED displays a capital C character.
The LED displays an S character.
The LED displays a lowercase c character.
The LED displays a number.
HI
LED status
Port mode LED System status
(Mode) LED (SYS)
Flashing green
(1 Hz) (PoE Steady green
mode)
Management
Ethernet port LED
(ACT/LINK) status
Steady green
Steady yellow
Flashing yellow (3 Hz)
TAA (2 slots), 5500-48G-PoE+-4SFP
Table
Seven-segment LED
The LED displays different signs.
Description
The port is operating at 1000 Mbps. The port LED fast
flashes when the port is sending or receiving data.
The port is operating at 10/100 Mbps. The port LED fast
flashes when the port is sending or receiving data.
POST has failed on the port.
60
Description
The switch is the command switch in a
cluster.
The switch is a member switch in a
cluster.
The switch is a candidate switch for a
cluster.
The member ID of the switch.
HI
18.
Description
For example, the
that the switch is
81 - 100%
61 - 80%
41 - 60% outputting 0 to 20%
21 - 40%
0 - 20%
of the maximum PoE
output power.
(2 slots), or
sign indicates