Progress Indicator; Unit Information - Panasonic NV-VP31 Operating Instructions Manual

Using On-Screen Menu Icons

Progress indicator

Indicates how far you have played through an item.
[DVD-V[
e.g.
2 2
a Current position
b Condition – play, pause, or slow/search
c Changing the time display [DVD-V] [RAM]
Press [34] to show the elapsed play time or remaining
time for the programme, play list, track or title (or chapter
during program and random play).
[VCD] (SVCD only) [MP3] [WMA]
Elapsed play time
For display only, cannot be changed.

Unit information

]DVD-V]
e.g.
Play Menu
A-B Repeat
[DVD-V] [RAM] [VCD] [CD] [MP3] [WMA]
(When the elapsed play time is displayed)
Repeat a section between points A and B within an
item.
[ENTER] (start point) > [ENTER] (end point) >
[ENTER] (cancel)
≥The end of an item becomes point B when it is
reached.
≥Some subtitles recorded around point A or B may not
appear.
≥A-B repeat is canceled when you press
[QUICK REPLAY].
Repeat mode (lpage 29)
Play mode (lpage 30)
[DVD-V] [VCD] [CD] [MP3] [WMA]
---: Normal play
PGM: Program play
RND: Random play
Marker (lright)
[RAM] : 999 positions
[DVD-V] [VCD] [CD] [MP3] [WMA] [JPEG] :
5 positions
ª Changing play speed
You can slow down or speed up play.
Press [2] (slower) or [1] (faster).
1 : 46 : 50
There are 5 steps of speeds:
a0.8 ,. a0.9 ,. a1.0 (normal speed) ,. a1.2 ,. a1.4
¬ To return to normal play
Press [ 1](PLAY).
[VCD] [CD]
Notes:
≥After you change the speed:
- Output is in stereo,
- You cannot use ADVANCED SURROUND,
- Digital output switches to PCM.
≥Sound is stereo as long as "a1.0" is orange.
ª Marker
Stores the position from which playback will resume later.
1) Press [ENTER] (The unit is now ready to accept markers).
2) Press [ENTER] again at the desired position.
≥To mark another position
Press [1] to select "
≥To recall or erase a marker
Press [21] to select a marker and press [ENTER] to recall or
press [CANCEL/RESET] to erase.
To mark the eleventh point and beyond [RAM[
1) Press [21] to select the marker pin icon.
2) Press [34] to select "11–20".
≥You can select the next group when the
3) Press [1].
Notes:
≥The markers are ordered by time. This means that the marker
numbers can change when you add and erase markers.
≥If places have been marked (e.g., with a DVD video recorder),
they are displayed.
≥You can clear existing markers, but they are restored when you
open the disc tray, change the source or switch the unit to
standby.
≥This feature doesn't work while using a play list.
≥This feature doesn't work during program and random play.
≥Markers added with this unit clear when you turn the unit off,
change the source, or open the disc tray.
38
[DVD-V] (Dolby Digital only)
¢
" and press [ENTER].
current group is full.
1–10