Option - Panasonic NV-VP31 Operating Instructions Manual

Settings Using the On-Screen Display

OPTION

0 -/- -
AV
INDEX/SKIP SLOW/SEARCH
NAVI
MENU
TOP MENU
MENU
DIRECT PLAY
NAVIGATOR LIST
ENTER
ENTER
DISPLAY
DISPLAY RETURN
PROG/CHECK TIMER PROG PLAY JET REW
AUDIO
CANCEL/RESET SUBTITLE ANGLE/PAGE
CANCEL/
AUDIO
RESET
MUSIC w/ PICTURE A.SRD CINEMA POSITION MEMORY
PICTURE SPEED INPUT SELECT
PLAY MODE REPEAT ZOOM SETUP
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time (lpage 25).
NTSC INPUT SELECT
Select the colour TV system used to record NTSC signals.
NTSC PB SELECT
Select the colour TV system of the TV used to play back a tape
recording NTSC signals.
JET NAVIGATOR (lpage 20)
DELETE NAVIDATA
See page 20 to delete data on a single tape.
OSD REC
You can record the present date and time on the same screen
which the picture is recorded.
OSD (lpage 25)
OUT [VHS/DVD] (lpage 12)
You can set the unit so that the output is automatically switched to
the device which starts playback.
DUBBING NORMAL AUDIO (lpage 42)
Select the audio channel to be recorded on the Normal audio track
when dubbing a bilingual DVD.
MONAURAL
Select the sound mode. (For NV-VP31GN only)
Press [34] to select the item and press [2 1] to change the
setting.
¬ To exit the settings screen
Press [MENU] twice.
Items
e.g. NV-VP31GN
OPTION 1/2
TAPE SELECT [AUTO]
NTSC INPUT SELECT [AUTO]
NTSC PB SELECT [onPALTV]
JET NAVIGATOR [OFF]
DELETE NAVIDATA [NO]
OSD REC [OFF]
OSD [AUTO]
OUT[VHS/DVD] [AUTO]
SELECT: END :MENU
Settings (Underlined items are the initial setting.)
AUTO: E30, E60, E90, E120, E180 and E240 tapes
E195: E195 tapes
E260: E260 tapes
E300: E300 tapes
AUTO: NTSC [4.43] and [3.58] signals
≥If the tape has not recorded correctly, select 4.43 or 3.58.
4.43: NTSC 4.43 signals
3.58: NTSC 3.58 signals
≥Some programmes on NTSC 3.58 system cannot be recorded
correctly at this position.
on PAL TV: TVs that can receive PAL signals
4.43: TVs that can receive NTSC 4.43 signals
3.58: TVs that can receive NTSC 3.58 signals
ON: Jet Navigator data automatically registered.
OFF: Data not registered.
≥If you select "ON", "OSD REC" is set to "OFF" automatically.
NO
ENTER: If you choose this position, press [ENTER] to delete
all the Jet Navigator data.
ON
OFF
≥If you select "ON", "JET NAVIGATOR" is set to "OFF"
automatically.
AUTO: Messages appear on the TV for about 5 seconds
when you press [DISPLAY].
OFF: Messages do not appear.
VHS: Only VHS outputs.
MANUAL: VHS output and DVD output are manually switched.
AUTO: VHS and DVD are automatically switched depending
on the manipulation or the unit operation.
L: To record the sound from left channel
R: To record the sound from right channel
ON: To record the normal sound during a NICAM
broadcast or if the stereo sound is distorted due to
inferior reception conditions.
OFF
24
OPTION 2/2
DUBBING NORMAL AUDIO [L]
MONAURAL [OFF]
SELECT: END :MENU