Special Vcr Features - Panasonic PV-V4524S Operating Instructions Manual

Special VCR Features

Auto Shut-Off Feature
The power shuts off at a preset time.
1
Press ACTION to display MENU.
2
Press to select
MENU
SET UP VCR
SET UP CLOCK "SET UP VCR,"
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH and press .
VCR'S OUTPUT CH: 3
SELECT : SET:
EXIT : ACTION
3 Press to select
SET UP VCR
REPEAT PLAY : OFF
"AUTO SHUT-OFF."
AUTO SHUT-OFF : OFF
FRONT DISPLAY : ON
Press repeatedly to
AUTO VCR/TV : ON
TAPE SELECT : T-120
change shutoff time as
SELECT : SET:
shown below.
EXIT : ACT I ON
4
Press ACTION
to return to normal screen.
• The shut-off countdown will not
Note
function during Play or Record.
VCR/TV Selection Feature
The VCR/TV selection can be set to auto or
manual.
1
Press ACTION to display MENU.
2
Press to select
MENU
SET UP VCR
"SET UP VCR,"
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH and press .
VCR'S OUTPUT CH: 3
SELECT : SET:
EXIT : ACTION
3 Press to select
SET UP VCR
REPEAT PLAY : OFF "AUTO VCR/TV,"
AUTO SHUT-OFF : OFF
FRONT DISPLAY : ON and press to set
AUTO VCR/TV : ON
"ON" or "OFF."
TAPE SELECT : T-120
SELECT : SET:
EXIT : ACT I ON
• OFF(Manual): You select "VCR" or "TV" mode
using the VCR/TV button on the
unit or remote.
• ON(Auto): "VCR" mode is automatically set
when VCR is turned on, or in Play
mode.
4
Press ACTION
to return to normal screen.
Note
• For more on VCR/TV selection, see "Record one
station, watch another" and "Select channels on
VCR" sections (p. 5 of Basic Operations book).
VCR Lock Feature
When set to ON, all operations except for timer
record and tape eject are prohibited. Useful for
households with small children.
To turn on, hold down REC
on the VCR in Stop mode with
BLOQUEO DEL VCR:INACTIVO BLOQUEO DEL VCR:INACT no tape inserted for 7 sec.
(Please ignore the NO
CASSETTE warning.)
To turn off, repeat above.
VCR LOCK OFF
• VCR Lock cancels in 24 hours.
Weak Signal Display ON/OFF Feature
When set to "ON," picture is displayed regardless
of signal strength.
1
Press ACTION to display MENU.
2
Press to select
MENU
SET UP VCR
SET UP CLOCK "SET UP CHANNEL,"
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH and press .
VCR'S OUTPUT CH: 3
SELECT : SET:
EXIT : ACTION
3 Press to select
SET UP CHANNEL
WEAK SIGNAL
ANTENNA : CABLE
AUTO SET DISPLAY, and press
WEAK S I GNAL D I SPLAY:OFF
to set "ON" or "OFF."
SELECT : SET:
EXIT : ACT I ON
• ON : Picture is displayed even if signal
is very weak but quality may be poor.
OFF : Screen turns solid blue when signal
is weak or non-existent.
• Selecting "ON" has no effect on connected
equipment with blue back feature.
4
Press ACTION
to return to normal screen.
Multi Function Display
(Front Display) ON/OFF Feature
Multi Function Display (Front Display) can be
set to ON/OFF.
1
Press ACTION to display MENU.
2
Press to select
MENU
SET UP VCR
"SET UP VCR,"
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH and press .
VCR'S OUTPUT CH: 3
SELECT :
SET:
EXIT : ACTION
3 Press to select
SET UP VCR
REPEAT PLAY : OFF
"FRONT DISPLAY,"
AUTO SHUT-OFF : OFF
FRONT DISPLAY : ON
and press to set
AUTO VCR/TV : ON
TAPE SELECT : T-120 "ON" or "OFF."
SELECT : SET:
EXIT : ACT I ON
• ON : When set to "ON,"
Multi Function Display is displayed
in Standby (OFF) mode.
OFF : When set to "OFF,"
Multi Function Display is not
displayed in Standby (OFF) mode.
If a Timer Program is set,
Multi Function Display is displayed.
4
Press ACTION
to return to normal screen.
REC
Multi Function Display
(Front Display)
- 10 -
On-Screen Displays (OSD)
On-Screen Displays (OSD)
Function & Channel Displays
When a function button is
CH 0 8
pressed, e.g. PLAY, or you
change channels,
a 5 second display
appears.
VCR Status & Clock Displays
To display or remove
overlay at right,
Function Status
➛ press DISPLAY*.
Rec Time Remaining
(OTR mode only.
See p. 5 of Basic
Operations book.)
Broadcast Audio
Being Received
Warning and Instruction Displays
OSD
If you attempt to set or review a Timer
PLEASE SET CLOCK BY
PRESSING ACTION KEY Recording and the Clock is not set...
After a Timer Program has been set...
TURN VCR OFF
FOR TIMER RECORDING
If you press REC on the remote
CHECK CASSETTE
control or VCR, and a cassette is
RECORD TAB
inserted with no record tab...
If you press PLAY, FF, REW, or REC on
NO CASSETTE
the remote control or VCR without a
cassette inserted...
TO CANCEL TIMER REC If you press POWER or STOP during
PRESS POWER THEN
a Timer Recording...
STOP KEY
(visible in VCR mode only)
VIDEO HEADS MAY
NEED CLEANING
PLEASE INSERT HEAD
If head cleaning becomes necessary
CLEANING CASSETTE
while playing back a tape...
OR REFER TO MANUAL
END :PLAY
If you press a function button other
VCR LOCK ACTIVATED
than STOP/EJECT or POWER while
the VCR is in VCR Lock mode...
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Blank Tape/
No Video Signal Indications
When blank tape is detected during play, or
the current channel has no signal (with Weak
Signal Display feature (p. 10) set to OFF), the
TV screen will turn solid blue.
Current Time
CH 02
REC 1 2 : 0 0AM
-0 : 1 2 : 3 4
0 : 25
STEREO SP
SAP
MONO
(See p. 3 of Basic
Operations book.)
These displays will alert you to a missed operation or
provide further instructions.
Caution Page
See page 6 of Basic
Operations book
See page 6 of Basic
Operations book
See page 3 of Basic
Operations book
See page 5 of Basic
Operations book
See page 6 of Basic
Operations book
See page 3 of Basic
Operations book
See page 10
- 11 -
Channel
Counter
Tape Speed