Setting Menu; Parental Menu - Sansui LEDTVSKQ48FH Owner's Manual

4. SETTING MENU

The backlight value can be varied (0-10) This function is used to adjust
Back Light
brightness level of panel .
TV is in Normal state when this is on, to save the power consumed by TV select power saving
Ecovision modes Power Saving Off/Low/Mid/High/Audio only mode. in Audio Only mode only audio
is On and Picture is off.
This feature operates only in HDMI source. If a CEC compliant device like Home theater
or DVD player is connected to TV in HDMI mode, then the Player controls can be operated
HDMI CEC
through TV Remote.
OSD Duration
Adjust display time of menu
Software
This is for LCD TV Software update. (For Service only)
Update(USB)
Select this option to reset all Feature, Audio, Video parameters to Default value
Reset

5. PARENTAL MENU

Make this switch On to Activate the Parental Control options selected by user . When Switch
Parent Lock
is Off the Parental Control, its options will not Operate.
Switch
Select this option to change the password (default - 0000
Set Password
password and confirm the same.
Channel Lock Press DIGIT KEY 2 key to Lock/Unlock the channels (1-200).
Press OK key to Lock/Unlock the Sources (TV/AV /YPBPR/HDMI1/HDMI2
Source Lock
PC/USB). Select the sources to be locked with left/right key on a remote.
Select this option to reset all Parental options to default value.
Clean All
Make this switch On to Activate the Hotel Mode options selected by user .When Switch is
Hotel Mode
Off the Hotel Mode, its options will not Operate.
Switch
Select this option to change the password (default - 0000
Set Password
password and confirm the same.
Key Lock Select this option On, panel keys will not operate.
Disable Search Making this option On, the search options/TV menu will be disabled for user.
The main volume is limited by setting MAX volume (0-100), User cannot
Max Volume
increase the main volume greater than MAX volume selected.
Power On
Source
Power On
Power On Set
Channel
Power On
Select this option to reset all Hotel Mode options to default.
Clear All
Select the power on source (TV/AV/YPBPR/HDMI1/HDMI2/PC/USB), after
the TV ON, the power on source will be same as specified here
Select the power on channel (1-200), after the TV ON, the channel will be same
as specified here.
By setting the power on volume (0-100), this volume will be set after set gets ON.
Vol
,master password is 8202
,master password is 8202
-13-
TV OPERATION
) Enter new
) Enter new