MAINTENANCE
TROUBLESHOOTING
1. If your power tool does not start, check the plug on the power supply first.
2. If the polisher does not abrade surface, check the bonnet.
If the bonnet has been worn, replace the new bonnet and try again.
3. If a fault can not be corrected, return the tool to a qualified dealer for inspection
and possible repair.
4. If the power supply cord is damaged, immediately discontinue tool use.
Take the tool to a qualified service dealer for inspection and possible repair.
Only use an identical replacement part power supply cord.
15
7-in. Polisher
PARTS LIST
MODEL NUMBER 172.395560
The model number will be found on the nameplate of the polisher.
Always mention the model number when ordering parts for this tool.
To order parts, call 1-888-331-4569
16