Retrieving Images continued... 4/8
2. Connecting to a Computer and Retrieving Images
Follow the procedures below to retrieve
camera images.
• Before you connect the camera to a
computer, always off the computer
and turn the camera's Mode Dial to
the L (Lock) position.
• Windows •
Connect the camera to the PC's serial port
with the PC interface cable.
DIGITAL Terminal
Serial Port
PC Interface Cable
2 2
Once the camera is attached to the compu-
ter, follow the procedures below to load
images and save them to the computer.
1) Turn the computer on.
2) Start your TWAIN-compliant application
program.
3) Turn the camera's Mode Dial
to the PC position.
4) Select [Canon PowerShot] from your
application's input device selection menu.
5) Start the TWAIN Driver from within your
application.
6) Use the TWAIN Driver to load the images
from the camera.