Stanley FMC650 Original Instructions Manual

Stanley FMC650 Original Instructions Manual

Hide thumbs Also See for FMC650:

Advertisement

www.stanley.eu
FMC650

Advertisement

Table of Contents
loading

Summary of Contents for Stanley FMC650

  • Page 1 FMC650...
  • Page 4: Intended Use

    3. Personal safety a. Stay alert, watch what you are doing and use common Your Stanley Fat Max jigsaw has been designed for sawing sense when operating a power tool. Do not use a wood, plastics and sheet metal. This tool is intended for power tool while you are tired or under the influence professional and private, non professional users.
  • Page 5: Residual Risks

    (Original instructions) ENGLISH e. Maintain power tools. Check for misalignment or Use clamps or another practical way to secure and binding of moving parts, breakage of parts and any support the workpiece to a stable platform. Holding the other condition that may affect the power tools work by hand or against your body leaves it unstable and operation.
  • Page 6: Additional Safety Instructions For Batteries And Chargers

    Chargers Impairment of hearing. Use your Stanley Fatmax charger only to charge the bat- Health hazards caused by breathing dust developed when tery in the tool with which it was supplied. Other batteries using your tool (example:- working with wood, especially could burst, causing personal injury and damage.
  • Page 7 (Original instructions) ENGLISH Assembly Leaving the battery in the charger The charger and battery pack can be left connected with the Warning! Before assembly, remove the battery from the tool LED glowing indefinitely. The charger will keep the battery and make sure that the saw blade has stopped. Used saw pack fresh and fully charged.
  • Page 8: Maintenance

    As the saw blade cuts on the upward stroke, splintering may occur on the surface closest to the shoe plate. Should you find one day that your Stanley Fat Max product Use a fine-tooth saw blade. needs replacement, or if it is of no further use to you, do not Saw from the back surface of the workpiece.
  • Page 10: Ec Declaration Of Conformity

    Stanley Europe. location of your nearest authorised Stanley Fat Max repair agent in the Stanley Fat Max catalogue or contact your local Stanley office at the address indicated in this manual. A list...

Table of Contents