Advertisement
This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not
contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered
by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or
products dealt with in this service information by anyone else could result in serious injury or death.
For AW-CB400N
Specifications
Supply voltage:
DC 12.0 V
Power consumption: 3.8 W
indicates safety information.
Input connectors
DC 12V IN:
GND:
Output connectors
CONTROL OUT
TO CONTROL PANEL:
CONTROL OUT
TO CAMERA 1 to 5:
Input/output connectors
INCOM (top panel):
TALLY/INCOM:
Switch functions:
Adjustment functions:
Ambient operating temperature:
Storage temperature:
Ambient operating humidity:
Dimensions (W x H x D):
Weight:
Finish:
Weight and Dimensions indicated above are approximate.
Specifications are subject to change without notice.
Accessories
Pan/tilt control panel (AW-RP400) connecting cable ...... 1
Tally/INCOM connector (D-SUB 15-pin) ......................... 1
Rack-mounting adaptors ................................................. 2
Join-up fixture .................................................................. 1
Mounting screws (M4 x 8 mm) ........................................ 8
Join-up screws (stepped screws) .................................... 2
Joining sticker .................................................................. 2
-
!
XLR, 4 pins
GND terminal
D-SUB 29-pin
RJ45, camera control RS-422 level
10Base-T straight cable (UTP category 5), max. 1000 meters
XLR, 4 pins
D-SUB 15-pin
TALLY: Contact input (do not apply a voltage in excess of 5V)
INCOM: 4-wire system
DATA SET, menu, camera control selection, DTL, scene file selection, gain selection,
BAR/CAM switching, white balance selection, AWC, ABC, call, lens iris
AUTO/MANU/LOCK switching, option switches (1 to 4)
LCD contrast, INCOM level, lens iris, menu settings, R-GAIN, B-GAIN, pedestal, R-PED,
B-PED
14˚F to 113˚F (- 10˚C to +45˚C)
- 4˚F to 140˚F (- 20˚C to +60˚C)
30% to 90% (no condensation)
3-15/16" x 3-3/8 " x 10-1/2" (100 x 85 x 266 mm)
3.1 lbs (1.4 kg)
Color resembling Munsell 3.5 paint
WARNING
- 2 -
Advertisement
