Advertisement
e. Menu (bottom-right)
T
T
L
:
HE
ASK
IST
(tapping Tasks in the bottom-left will result in this screen)
Here's a breakdown of the functions of each tool:
View Map
1)
(Selecting Map in the bottom-left of the Task List
will do the same thing)
Zooming and Panning
a.
i. The plus sign zooms you in and the
minus sign zooms you out. You have to
click on the button and then using the
stylus draw a box around the area you
want to zoom on.
ii. To pan, simply press the stylus on the
screen and drag; do it firmly, otherwise
the screen will redraw only half way. If
that happens, zoom in or out or pan
again and it will redraw correctly.
iii. NOTE: Try to avoid using the rocker to
pan and zoom. It is a known issue with
the unit, and will most likely result in a
system crash. Please use the stylus.
Identify
b.
i. If pressed, you will be able to touch any point on the screen and layers will be
identified, whether they are points, lines or polygons. Press again to turn off.
Menu (bottom-right)
c.
i. Show Lat/Long on Map
ii. Zoom to Full Extent
iii. Go To A Location
iv. Pan*
v. Zoom In*
vi. Zoom Out*
vii. GPS (discussed in greater detail later in this manual)
1. If GPS is active and this is checked, the Lat/Long will be visible on the
map. Uncheck to turn off.
1. Select this to zoom out to entire project extent.
1. Use this to manually set a lat/long navigational waypoint. See Using the
GPS in Navigation later on in this manual.
1. Keep GPS in View
a. Centers the map on the current GPS position if GPS is active.
Advertisement
