Advertisement
Synchronizing Using Windows Mobile Device Center
This guide is for computers with an operating system newer than Windows XP, for
computers with operating systems running Windows XP or older see the Synchronizing using
active sync guide.
First connect your GPS unit to the computer and this screen should pop up: Note the first
time you connect to the device it may take a few minutes to install the drivers. Also there is
going to be another screen that pops up that you can say the never option again and it will not
come back.
Once your at this screen you will notice the little connected check mark, it will not be
there if the device is not connected for whatever reason. If its plug in but not appearing try
checking the cord that's plug into the GPS unit and the usb in the computer. If both cords are
plugged in securely, and it is still not working try a different usb port on your computer. If this
does not solve the problem try restarting the computer and GPS unit.
When you have a connection click on the "Connect without setting up your device"
window, and this will bring you to this screen.
Advertisement
