Samsung AR09KSWSJWKNCV Service Manual page 17

Upon completion of the selection, check you made right selections.
Step 6
Press the Mode Selection key to set the display part and check the display part.
→ The display part shows like below when each time you press Mode button.
Pressing the ON/OFF button (
Step 7
When pressing the operation ON/OFF key with the direction of remote control for unit, the sound ' ' Ding' ' or 'ring' '
and the OPERATION ICON( ) lamp of the disp
(If the deriving sound isn't heard, try again pressing the ON/OFF button.)
Unit operation test-run.
Step 8
First : Remove the battery from the remote control.
Second : Re-insert the battery into the remote control.
Third : Press ON/OFF key with the direction of remote control for set.
■ Error mode
1. If all lamps of indoor uni
2. If the unit is not working properly or all lamps are continuously
set up for its model.
□ Option Items
3-8
) .
ickering, Plug out, plug in power plug again and press ON/OFF key to retry.
ame time, then the input of option is completed.
after setting the option code, the correct option code is
Samsung Electronics