Parts And Their Functions; Operation Panel - Panasonic AJ-RC5 Operating Instructions Manual

Parts and Their Functions

Operation panel

VTR/SCENE
3
VTR
REW
2
REC
ONLY
S1
1
VTR ON
STOP
SCENE
S3
AWB W.BAL
5
2 VTR enable indicator
This comes on when the 1 VTR/scene enable switch has been set to REC ONLY or VTR ON.
3 REW/S1 button
VTR operations:
Scene file operations: The button serves to select or release scene No.1 of the scene files.
4
FF/S2 button
VTR operations:
Scene file operations: The button serves to select or release scene No.2 of the scene files.
5
STOP/S3 button
VTR operations:
Scene file operations: The button serves to select or release scene No.3 of the scene files.
6
PLAY/S4 button
VTR operations:
Scene file operations: The button serves to select or release scene No.4 of the scene files.
<Note>
For details on the scene file operations, refer to the section entitled "Scene File Operations"
(page E-9).
7
START/STOP / SAVE button
VTR operations:
Scene file operations: The button serves as the scene file SAVE button.
8
REC CHK/LOAD button
VTR operations:
Scene file operations: The button serves as the scene file LOAD button.
9 VTR WARNING indicator
This indicates that an error has occurred in the VTR's operation.
4
28
VTR WARNING
START/STOP
FF
S2
SAVE
PLAY REC CHK
LOAD
S4
CAM AUTO GAIN
KNEE
6
The button serves as the VTR's REW (rewind) button.
The button serves as the VTR's FF (fast forward) button.
The button serves as the VTR's STOP button.
The button serves as the VTR's PLAY (playback) button.
The button serves to start or stop the VTR's REC (recording)
operations. When the 1 VTR/scene enable switch has been set to
REC ONLY, all VTR operations except those initiated by this button do
not take effect.
The button serves to display the VTR's recording status.
1 VTR/scene enable switch
Depending on this switch's position, the
functions of the operations performed
using buttons 3 to 8 are switched.
REC ONLY: The VTR operations (7
9
7
VTR ON:
8
SCENE:
E-3
only) performed using the
unit take effect.
All VTR operations (3 to 8)
take effect.
The scene file operations
(functions indicated below
buttons 3 to 8) are
selected.