Panasonic PV-DF204 Operating Instructions Manual page 23

Using the Number and 100 keys
When selecting CABLE channels 100 to 125
with the NUMBER keys, first press the 100
key, and then enter the remaining two digits.
Example 1:
To select channel 125, first press the 100
key, then 2, then 5.
Example 2:
To select channel 12, first press the 1 key,
then 2.
Example 3:
To select channel 2, first press the 0 key,
then 2.
Rapid Tune
Press R-TUNE to display the last channel
you were watching.
Audio Mute
Press MUTE to instantly mute the sound.
Press again to restore the previous sound
level.
Surround Sound System
You can hear a deeper, 3-D sound effect
using just the unit's two front speakers.
Press SURROUND.
•"SURROUND ON" is displayed.
To Cancel, press SURROUND.
Notes
• Surround sound effect is not available for normal
(mono) broadcasts.
• The surround effect (TV, VCR mode only) is not
output to Audio Output L/R Connector.
Weak Signal Display Feature
When "ON" is selected, the picture is
displayed even when a broadcast signal is
weak or non-existent.
1 Press ACTION to display MAIN
MENU.
2 Press ▲ ▼◄► to select "CH."
3 Press SET to display SET UP
CHANNEL screen.
4 Press ▲ ▼ to select "WEAK SIGNAL
DISPLAY."
5 Press SET to set "ON" or "OFF."
ON:
Picture is displayed regardless of signal
condition, and may not always be clearly
visible.
OFF:
Screen turns solid blue when signal is
absent or weak.
Note
• If unit is connected to equipment which has
blue back feature, selecting "ON" will have
no effect on the other equipment.
6 Press ACTION twice to return to the
normal screen.
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
SET UP CHANNEL
ANTENNA : CABLE
AUTO SET
WEAK SIGNAL DISPLAY:OFF
SELECT: SET:SET
END :ACTION
23