Copy Your Tapes (Dubbing) - Panasonic PV C2062 Operating Instructions Manual

Copy Your Tapes (Dubbing)

*Important: If a remote control button does not work when pressed, press the COMBO button
on the remote and try the button again.
Connections you'll need to make.
Playing (Source) VCR
AUDIO
OUT
IN
Playback (Source)
1
Our Vacation
2
3
(Perform operation of steps 4 and 5 on both units at same time.)
4
5
STOP
Caution
• Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
VIDEO
IN FROM ANT.
OUT TO TV
Insert pre-
recorded tape.
Press PLAY then
PAUSE at starting
point to put in
Standby mode.
Press PLAY
to start dubbing.
Press STOP
to stop dubbing.
Recording (Editing) unit
VIDEO IN
Recording (Editing) unit
Insert blank tape with
record tab.
• Dubbing tapes protected
Select "LINE" mode.
See "Selecting Input Mode" below.
Press REC, then
PAUSE/SLOW
immediately to put in
Standby mode.
Press PAUSE/SLOW
to start dubbing.
Press STOP
to stop dubbing.
Selecting Input Mode
Method 1:
Press CH . The display will change as follows.
LINE
Method 2:
a Press ACTION for MAIN MENU.
b Press to select "TV", then press
ACTION for SET UP TV screen.
c Press to select "INPUT SELECT," and
then press to select "TUNER" or "LINE."
d Press ACTION twice to exit this mode.
AUDIO IN
AUDIO IN
with Copy Guard will have
poor quality results.
1 2 3
(CABLE) (TV)
125 or 69
13